EKEMP MP200 Panduan Pengguna - Halaman 10

Jelajahi secara online atau unduh pdf Panduan Pengguna untuk Printer EKEMP MP200. EKEMP MP200 12 halaman. Portable thermal bluetooth printer

Halaman Cetak

3.3

connection

3.3

3.3 Print

Print connection

connection

connection and

3.3.1

3.3.1 Serial

3.3.1

Serial

Serial port

port

port connection

Optional accessories of printer contain DB-9 serial cable(other end MINI

DIN plug connect the printer).

3.3.2

Original

infrared

3.3.2

3.3.2 Original

Original infrared

infrared and

IR data communication technology can be used to data communicate with your

equipment.

IR data communication technology is a kind of wireless data communication

technology which is use IR as a communication carrier that develop and

developed by IR Data Association (IrDA).

Using method

IR port, wireless data transmission interface, now has been the main means

of data communication for most of portable devices because of its low power

consumption, mature technology, easy to use and exp. Most of portable devices

have IR port such as all of the WINCE Pocket PC, PALM PDA, notebook computers,

some mobile phones, most of portable data collector and a small part of

measuring instruments that used in field operations.

The printer's hardware compatible IrDA1.1 specifications. IrCOMM protocol

is a sub-agreement of IrDA protocol. It has used in many portable devices.

Original IR data communication method can connect device that has original

IR interface to print. IrCOMM ways can connect IrCOMM protocol device to print.

More knowledge about IrDA please visit http://www.irda.org.

Printer can't work at original IR state at the same time work at VIR and/or

IrCOMM state. You can use the printer only after reset if the printer isn't

work in the state you need to be. Method of setting IR model please look at

3.3 printer setting.

Original IR can work at Baud Rate of 9600bps、19200bps、38400bps、57600bps、

115200bps.

When printing in original IR （RAW-IR）and IrDA（IrCOMM）mode, please align

master's infrared line to printer's infrared windows in printing process.

The distance can't exceed 50 cm(may be different by the master device). The

angle can't exceed 30 degrees.

Details of original IR and IrCOMM develop please refer to <development manual

of portable mini-printer>.Demand the manual from your supplier.

- 10 -

and

and print

and

connection

and

IrDA

and IrDA

IrDA connectivity

connectivity