eKey Home Panduan Petunjuk Pengoperasian - Halaman 9
Jelajahi secara online atau unduh pdf Panduan Petunjuk Pengoperasian untuk Gerbang eKey Home. eKey Home 20 halaman.
Juga untuk eKey Home: Panduan Petunjuk Pengoperasian (17 halaman)
Halaman Cetak7.1.8
SETTING A NEW SECURITY CODE
Please be aware that the device cannot be operated further without setting a new security code. After three
incorrect attempts the device is locked for 30 minutes.
First enter the security code as per section 7.1.5
7.1.8.1
SETTING A NEW CODE
Press the > button until "Sc" is displayed
Press the OK button
Enter the left digit of the new security code using the < and > buttons
Press the OK button
Enter the right digit of the new security code using the < and > buttons
Press the OK button
"OK" is displayed for a short time. The device then returns to normal mode.
7.1.9
ACCESSING SERIAL NUMBER AND VERSION NUMBER
The serial number and version number can also be accessed via the 7-segment display. Two digits of the
number are displayed at a time. This is especially important for Integra models, as their parts are built-in and
the labels are usually no longer visible.
The serial number corresponds to the serial number of the device and therefore allows you to determine the
date of production and the hardware model. The version number corresponds to the update version of the
software.
Enter the first security code as per section 7.1.5
7.1.9.1
ACCESSING THE SERIAL NUMBER
Press the > button until "In" is displayed
Press the OK button
Use the < and > buttons to select the option "Sn" for serial number
Press the OK button
Use the < and > buttons to select which device you wish to view the serial number on:
Press the OK button
Now you will be able to see the first two digits of the serial number. By pressing the > button you can view
the remaining digits. The serial number is 14 digits long.
By pressing the OK button you return to the first two digits of the serial number. If you press the ESC
button once you have reached the last two digits the display moves up a level in the navigation.
Accessing the version number
After inputting the security code the following steps are necessary
Press the > button until "In" is displayed
Press the OK button
Use the < and > buttons to select the option "US" for the software version.
Press the OK button
Use the < and > buttons to select which device you wish to view the version number on:
Press the OK button
Now you will be able to see the first two digits of the version number. By pressing the > button you can
view the remaining digits. The version number is 8 digits long.
By pressing the OK button you return to the first two digits of the version number. If you press the ESC
button once you have reached the last two digits the display moves up a level in the navigation.
"FS".... Finger scanner
"CU".... Control panel
"FS"....Finger scanner
"CU".... Control panel