Canon Color imageCLASS MF8050Cn Panduan Pemula - Halaman 11
Jelajahi secara online atau unduh pdf Panduan Pemula untuk Semua dalam Satu Printer Canon Color imageCLASS MF8050Cn. Canon Color imageCLASS MF8050Cn 33 halaman. Colour laser multifunction
Juga untuk Canon Color imageCLASS MF8050Cn: Panduan Pemula (29 halaman), Spesifikasi (2 halaman)
Halaman Cetak
1
2
Preface
Installing the Machine
Check and press [OK].
Check that paper is
loaded in Drawer 1.
Next
Performing Color Correction
Color correction takes approximately 255 seconds.
Make sure that paper is loaded,
and then press [OK].
Supported paper:
Size: A4, LTR, 16K
Type: Plain 1/2, Rec
OK
Confirm the procedure for color
correction, and then press [OK].
Steps (Start:Press OK)
1. Print Adj. Image 1
2. Scan Adj. Image 1
A test chart (adjusted image 1) is printed.
Open the feeder.
Press [
] (Start).
Remove the test chart (adjusted image 1) placed on the platen glass in Step
3
Configuring and Connecting the Fax
Use the numeric keys,
and then press [OK].
Current Time Settings
2010 01/01
12:52
AM
•
Move the cursor with [ ] or [ ].
•
Switch to <AM> or <PM> with
[
] or [
].
Step 1
Printing adj. image 1.
Place the test chart with the print
side face down.
Place the paper so that the black stripe
is at the back side of the machine.
Place adj. image 1 on
the glass with black
side toward the back.
Press [Color] start.
4
Connecting to a Computer and
Installing the Drivers
Press [OK].
Adjust image to
reproduce original
color?
Yes
No
•
You can perform color
correction by selecting
<Yes> to obtain optimum
copy results or printout
results. For details on the
procedure, see the following
"Performing Color
Correction."
Check the temperature of the installation site.
If the room temperature is low, correction may not be
performed properly.
If <Adjustment failed.> appears
•
Is the paper loaded correctly?
→
Load plain paper or recycled paper of A4/Letter size in the paper
cassette.
•
Is the test chart placed on the platen glass correctly?
→
Place the test chart with the print side face down and the black
stripe toward the back of the machine.
•
Has a paper jam occurred?
→
Remove the jammed paper.
If you want to perform color correction again, press [
(Menu), and then select the following settings in the following
order.
<Adjustment/Cleaning> → <Auto Gradation Adjustment> →
<Copy Image Adjustment>
Step 2
Copy Image Adjustment
Scanning adj. image 1.
Appendix
An initial screen appears, and initial
setting is finished.
Copy: Press Start
100%
1
LTR
+ -
Density: 0
Original Type: Text...
Copy Ratio: 100% Di...
If <Open the back cover, remove the
protective sheet.> appears
The packing materials inside the back
cover has not been removed.
Refer the procedure of "2. Remove
the packing material" in P.4 to
remove them.
]
Close the feeder.
.
1
9