Canon Color imageCLASS MF8350Cdn Panduan Pemula - Halaman 11
Jelajahi secara online atau unduh pdf Panduan Pemula untuk Semua dalam Satu Printer Canon Color imageCLASS MF8350Cdn. Canon Color imageCLASS MF8350Cdn 29 halaman. Canon imageclass mf8350cdn: quick start
Juga untuk Canon Color imageCLASS MF8350Cdn: Panduan Pemula (33 halaman), Panduan Pemula (28 halaman)
Halaman Cetak
1
2
Preface
Installing the Machine
Use numeric keys, and then
press [OK].
Current Time Settings
2010 01/01
12:52
AM
•
Move the cursor with [ ] or [ ].
•
Switch to <AM> or <PM> with [
or [
].
Performing Color Correction.
Color correction takes approximately 165
seconds.
Make sure that paper is loaded,
and then press [OK].
Supported paper:
Size: A4, LTR, 16K
Type: Plain 1/2, Rec
OK
Confirm the procedures for the color
correction, and then press [OK].
Steps (Start:Press OK)
1. Print Adj. Image 1
2. Scan Adj. Image 1
The test chart (adjusted image 1) is printed.
Place the test chart with the printing side face down.
Place the paper setting the direction of black streak to the
back side of the platen glass.
Press [
] (Start).
Remove the test chart (adjusted image 1) placed on the platen glass in Step
3
Configuring and Connecting the Fax
Press [OK].
Adjust image to
reproduce original
color?
Yes
•
You can perform color correction by
selecting <Yes> to obtain optimum copy
results or printout results. For details
on the procedure, see the following
]
"Performing Color Correction."
Check the temperature of the installation site.
If the room temperature is low, correction may not be performed properly.
If <Adjustment failed.> appears
•
Is the paper loaded correctly?
→
Load plain paper or recycled paper of A4/Letter size in the paper cassette.
•
Is the test chart placed on the platen glass correctly?
→
Place the test chart with the printing side face down and the black streak toward
the back of the machine.
•
Has a paper jam occurred?
→
Remove the jammed paper.
Step 1
Printing adj. image 1.
Place adj. image 1 on
the glass with black
side toward the back.
Press [Color] start.
4
Connecting to a Computer and
Installing the Drivers
No
Open the feeder.
Close the feeder.
Step 2
Copy Image Adjustment
Scanning adj. image 1.
Appendix
Initial screen appears, and initial
setting is finished.
Copy: Press Start
1
100%
LTR
1
+ -
Density: 0
Original Type: Text...
2-Sided: Off
.
9