Air Comm Systems ACS PA100 F Panduan Instalasi dan Pengoperasian - Halaman 4

Jelajahi secara online atau unduh pdf Panduan Instalasi dan Pengoperasian untuk Unit Kontrol Air Comm Systems ACS PA100 F. Air Comm Systems ACS PA100 F 9 halaman. Pa/siren system control unit

Halaman Cetak
ACS PA100(F/D) Control Unit Installation and Operations Manual
Interface Schematic
n

Connector Schematic

Figure 2 — Control Unit and Amplifier Connector Schematic
The ACS PA100(F/D) wiring harness should be constructed of Tefzel aircraft wire (M22759/16 grade).
All wires to be the wire gauge as noted in the above connector schematic. Adequate protection against
wear and chafing should be taken by using a braided cable sleeving or jacket. Before completing
installation, verify that all cable connector pins are seated properly and that the connector is securely
mounted to the unit mating connector.
installing; it will be either 14VDC or 28VDC and clearly marked as such on the unit’s data tag.
Pre-fabricated cable harnesses are available from Air Comm to expedite installation — consult our
sales department for details.
Air Comm Systems, Inc.
Important — please note the power of the unit before
Page 4