EKF Diagnostics Lactate Scout+ Panduan Petunjuk Instalasi - Halaman 16

Jelajahi secara online atau unduh pdf Panduan Petunjuk Instalasi untuk Alat Ukur EKF Diagnostics Lactate Scout+. EKF Diagnostics Lactate Scout+ 18 halaman. Instructions for bluetooth installation for hand-held lactate analyzer

Halaman Cetak

3. Next, switch on the Lactate Scout+ in "Setting and Storage Mode":

Before it is switched on, make sure that there is no sensor plugged

into the device. Turn on the device by pressing the scroll wheel for two

seconds and turn the scroll wheel until a blinking "set" and a blinking

Bluetooth

icon „ " appear on the LCD screen:

After pressing the scroll wheel

briefly, the menu is activated and

the message "OFF" is displayed on

the main display together with the

blinking Bluetooth

icon:

After pressing the scroll wheel briefly, the Bluetooth

activated. Please note: The device will turn off automatically after

five minutes if no user input is detected. However, you can turn on

the device again as already described above and continue working.

(See Lactate Scout+ manual).

By turning the scroll wheel by

one click, the message "On" is

appearing on the LCD screen

together

with

outlined

Bluetooth

icon „ ":

module is

4. To add a new Bluetooth

connection, please click on the Bluetooth

in the taskbar and on the menu item „Add new connection":

5. Now the computer is searching for the Lactate Scout Plus

device and displays it in a corresponding list. In the next step

the

connection

added

At first you have to click on the button „back" and in the next dialog

window select "User defined mode". Please click on „Next":

using

the

„user

defined

icon

mode".