Ekinex EK-ET2-TP-R Panduan Memulai Cepat - Halaman 6

Jelajahi secara online atau unduh pdf Panduan Memulai Cepat untuk Pengontrol Ekinex EK-ET2-TP-R. Ekinex EK-ET2-TP-R 8 halaman. Room temperature controller with humidity and co2 equivalent regulator

Halaman Cetak

Ekinex EK-ET2-TP-R Panduan Memulai Cepat

Disposal

At the end of its useful life the product de-

scribed in this datasheet is classified as wa-

ste from electronic equipment in accordance

with the European Directive 2012 / 19 / EU

(WEEE recast), and cannot be disposed to-

gether with the municipal undifferentiated so-

lid waste

Warning! Incorrect disposal of this product may

cause serious damage to the environment and hu-

man health. Please be informed about the correct

disposal procedures for waste collecting and pro-

cessing provided by local authorities.

Documentation

This datasheet refers to the release A1.0 of the ekinex

device EK-ET2-TP... is available for download at www.

ekinex.com as a PDF (Portable Data Format) file.

File name

Device release

STEKET2TP_EN.pdf

Warnings

• Installation, electrical connection, configuration and

commissioning of the device can only be carried out by

qualified personnel in compliance with the applicable

technical standards and laws of the respective countri-

• Opening the housing of the device causes the imme-

diate end of the warranty period

• In case of tampering, the compliance with the essential

requirements of the applicable directives, for which the

device has been certified, is no longer guaranteed

• ekinex

KNX defective devices must be returned to the

manufacturer at the following address: Ekinex

Via Novara 37, I-28010 Vaprio d'Agogna (NO) Italy

Other information

• This datasheet is aimed at installers, system integra-

tors and planners

• For further information on the product, please contact

the ekinex

technical support at the e-mail address:

[email protected] or visit the website www.ekinex.

com

• Each ekinex

device has a unique serial number on

the label. The serial number can be used by installers

or system integrators for documentation purposes and

has to be added in each communication addressed to

the ekinex

technical support in case of malfunctioning

of the device

• KNX

and ETS

are registered trademarks of KNX As-

sociation cvba, Brussels

S.p.A. The company reserves the right to make changes to this

documentation without notice.

Updating

A1.0

02 / 2018

S.p.A.