Ekinex KNX EK-E32-TP-NFW Panduan Memulai Cepat - Halaman 5

Jelajahi secara online atau unduh pdf Panduan Memulai Cepat untuk Pengontrol Ekinex KNX EK-E32-TP-NFW. Ekinex KNX EK-E32-TP-NFW 5 halaman. Pushbutton

Dimensions [mm]
Set rockers
EK-TRV-...
39,5
3
Set rockers
EK-TRO-...
80
86
Square frame form
series EK-FOQ-...
94
Square frame flank
series EK-FLQ-...
Marks
• KNX
• CE: the device complies with the RoHS III Directive
(2011/65/EU) and the Electromagnetic Compatibility
Directive (2014/30/EU). Tests carried out according to
EN 63044-5-1:2019; EN 63044-5-2:2019
Set rockers
EK-TQQ-...
3
39,5
8
8

Maintenance

The device is maintenance-free. To clean use a dry cloth.
It must be avoided the use of solvents or other aggressive
substances.
Disposal
At the end of its useful life the product
described in this datasheet is classified
as waste from electronic equipment in
accordance with the European Direc-
tive 2012/19/EU (WEEE recast), and
cannot be disposed together with the
municipal undifferentiated solid waste.
!
Warning! Incorrect disposal of this product may
cause serious damage to the environment and hu-
man health. Please be informed about the correct
disposal procedures for waste collecting and pro-
cessing provided by local authorities.
Documentation
This datasheet refers to the release 6.0 of the ekinex
device EK-ED2-TP-... and to the release 1.0 of the ekinex
device EK-E32-TP-..., and is available for download at
www.ekinex.com as a PDF (Portable Data Format) file.
File name
STEKED2E32TP_EN_v.4.2.pdf
Warnings
• Installation, electrical connection, configuration and
commissioning of the device can only be carried out by
qualified personnel in compliance with the applicable
technical standards and laws of the respective countri-
es
• Opening the housing of the device causes the imme-
diate end of the warranty period
• In case of tampering, the compliance with the essential
requirements of the applicable directives, for which the
device has been certified, is no longer guaranteed
• ekinex
KNX defective devices must be returned to the
®
manufacturer at the following address: EKINEX S.p.A.
Via Novara 37, I-28010 Vaprio d'Agogna (NO) Italy
Other information
• This datasheet is aimed at installers, system integra-
tors and planners
• For further information on the product, please contact
the ekinex
technical support at the e-mail address:
®
[email protected] or visit the website www.ekinex.
com
• Each ekinex
device has a unique serial number on
®
the label. The serial number can be used by installers
or system integrators for documentation purposes and
has to be added in each communication addressed to
the EKINEX technical support in case of malfunctioning
of the device
• KNX
and ETS
are registered trademarks of KNX As-
®
®
sociation cvba, Brussels
© EKINEX S.p.A. The company reserves the right to make changes to this
documentation without notice.
5
Device release
Updating
6.0
05 / 2023
1.0
®