American Standard One T064.740 Fitur & Dimensi
Jelajahi secara online atau unduh pdf Fitur & Dimensi untuk Termostat American Standard One T064.740. American Standard One T064.740 2 halaman. Two-handle thermostat with separate volume control
Halaman Cetak
200mm
(7-7/8)
R520
1/2" NPT INLETS
or
R540
3/4" NPT INLETS
GENERAL DESCRIPTION:
Cast brass valve body. The single unit contains two
handles, the bottom lever handle sets the desired
temperature and the top lever handle functions as an
on/off, volume control. The temperature is maintained by
a wax element moving a shuttle valve between hot and
cold. The volume is controlled by twin ceramic disc valve
cartridges. Ceratherm includes Hot Limit Safety Stop.
Maximum temperature limit is 112°F. Escutcheon plate is
stamped brass. Available with 1/2" or 3/4" NPT inlets
and outlets. The valve has a high flow rate, ideal for
mutiple outlet installations.
SUGGESTED SPECIFICATION:
Two handle Thermostat shall feature a cast brass valve body. Thermostat shall be a wax element shuttle valve. Shall also
feature ceramic disc valving, 1/2" NPT or 3/4" NPT inlets and outlets. Fitting shall be American Standard Model # T064.740.___
(Trim Kit) and R520 or R540 (Rough Valve).
© 2008 AS America Inc.
NOTE: FITTING
150mm
MUST BE INSTALLED
(6)
WITH VOLUME CONTROL
ON TOP.
TWO-HANDLE THERMOSTAT
WITH SEPARATE VOLUME CONTROL
MODEL NUMBER:
TRIM KITS:
T064.740 Two-Handle Thermostat Trim Kit
With separate volume control. L ESS Valve.
ROUGH VALVES:
R520 Rough Valve Body only
1/2" NPT inlets/outlets. With separate volume control.
L ESS Trim.
R540 Rough Valve Body only
3/4" NPT inlets/outlets. With separate volume control.
L ESS Trim.
NOTE:
• When used as a Bath/Shower:
EITHER
- a separate diverter valve (such as R420 or R430)
OR
- a diverter tub spout (requires twin ell - Model #8888.120)
IS REQUIRED
186mm
(7-3/8)
25mm
(1)
PRODUCT FEATURES:
Brass Casting:
Highest quality faucet material for durability &
long life.
Wax Thermostatic Unit:
between the hot and cold seat to maintain the pre-selected
constant water temperature.
Back to Back Capable:
Spring-Loaded Check Valves:
enters the fitting, both supplies pass through the spring-loaded
check valves to prevent cross flow of hot and cold water.
Integrated Stop Valves:
Adjustable Hot Limit Safety Stop:
water allowed to mix with cold. Reduces the risk of accidental
scalding. Maximum water temperature limit may be reduced to
104 or 109 degrees Fahrenheit.
F19
ONE™
160mm
(6-1/4)
FINISHED
WALL
100mm
(3-7/8)
48mm to 68mm
(2 to 2-5/8)
Permits shuttle valve to move
Hot and cold can be reversed.
When the hot and cold water
Ensure easy cleaning and servicing.
Limits the amount of hot