DÖNDER WAGON Series Manual - Halaman 7

Jelajahi secara online atau unduh pdf Manual untuk Penyebar DÖNDER WAGON Series. DÖNDER WAGON Series 17 halaman. Fertilizer spreaders

Hydraulic array connected to the tractor; enables starting and stopping the flow of

the material out of the vessel.

Array controlling band speed; the part on the left back side when looked at from the

back.

Cover level

; sets the amount of the material flowing out of the vessel. By loosing the lever

handle, you can shift the indicator up down on the table. It is situated on the back of the

machine.

Spread extent setting;

machine. It has two parts.

First Part:

It is the part first spreading the fertilizer through the band. When you turn the handle in the

middle, angle of the tray changes. On the right side, there are angle levels indicated by

letters such as D,E,F.

When you shift the array N, spreaded material is consantrated in the center of the work

extent.

When you lower the array, and shifted in A direction, spreaded material is disposed in bulks

outside the work extent.

There are small handles on both sides of the handle in the middle. These handles fixe the

wings marked 4-6t. By moving the wings, it is possible to spread the fertilizer close to the

center or the edges of the disc; which affects the width of spreading.

When the wings are moved towards the level 9 ( fertilizer poured to the point close to the

center of disc), then spreading increases the extent of work.

When the wings are moved towards the level 1 (fertilizer poured to the point away from the

center of disc) decreases the width of spreading.

sets how many meters high fertilizer will be spreaded by the

01.10.2013

- 6 -