DONG IL TECHNOLOGY ARS-H002ZA Buku Petunjuk - Halaman 10

Jelajahi secara online atau unduh pdf Buku Petunjuk untuk Alat Ukur DONG IL TECHNOLOGY ARS-H002ZA. DONG IL TECHNOLOGY ARS-H002ZA 18 halaman. Hand-held electrostatic voltmeter

Halaman Cetak

7. Operating Instruction

ARS-H002ZA is a portable electrostatic voltmeter, which is affected by environment.

Please read carefully the operating instruction below for an exact measurement.

7.1 Power supply[Battery use]

1) Battery socket is disconnected to prevent battery consumption during distribution.

Please open the cover of battery slot and connect battery to its socket before use.

2) (Battery check)Power status is displayed on LCD as below. Please check the

power status periodically and change a battery when the battery is out.

3) The procedure for changing battery is as below.

① a cover of battery slot is on the back of main body. Pushing

the cover, pull it down. Then it opens.

② After taking a battery out of main body, disconnect the battery

to its socket.

③ Connect a new battery to the battery socket.

④ Put the battery in main body. At this time, arrange wires of the

socket inside the battery slot.

⑤ Close the cover of the battery slot.

7.2 Measuring set-up

1) Connect main body to earthed objects with an ground cable.

2) It is recommended to wear Earth-Ring or ESD gloves to avoid a static electricity

from human body.

If Earth cable is not connected, inexact values could be measured. Please use the

Warning!!

product after checking the product earthed.

3) Press [POWER] button to operate the product apart from a charged test objet or ionizer.

4) Check the display is same as below after power on.

[Initial DISPLAY on Electrostatic mode]

DONG IL TECHNOLOGY LTD

Change a new battery

[Initial DISPLAY on Ion Balance mode]