American Technologies Network Night ScoutVX Panduan Pengguna - Halaman 4

Jelajahi secara online atau unduh pdf Panduan Pengguna untuk Teropong American Technologies Network Night ScoutVX. American Technologies Network Night ScoutVX 8 halaman. Night vision binoculars

Halaman Cetak

FOCUSING

Diopter

adjustment

INFRA-RED ILLUMINATION

Built-in infra-red

(IR) illuminator

LOW BATTERY INDICATOR

If the batteries start losing voltage, LED indicator will start to pulse, it is time to change your battery.

USING THE CAMERA ADAPTER

To use your Night Scout VX with a 35 mm camera or camcorder you will need the following:

1) If you plan to use a camcorder then your camcorder must have a MACRO feature. Most

modern camcorders today have a MACRO feature built in.

2) If you plan to use a 35mm camera you will need a MACRO lens. If you don't have one we

advise that you contact your local camera store.

3) You may or may not need a STEP-UP or STEP-DOWN ring in order to adapt the camera

adapter to your lens.

NOTE: The camera adapter comes with 37-mm and 52-mm threads. If you need other sizes your

local camera store should be able to help.

• Screw the camera adapter onto the front of the lens on your Video camera's lens or your

35-mm camera's lens.

• Loosen the three set screws on the camera adapter.

• Place the camera adapter over the Night Scout's eyepiece.

• Tighten the three set screws to fit snugly to the Night Scout's eyepiece

• You may need to focus the 35mm camera or video camera in combination with the Night

Scout VX in order to get the sharpest possible image.

To focus the Night Scout VX first you will need to adjust

the diopters. Simply turn the diopters clockwise until

they stop. Then, while looking through the diopters at an

object, slowly turn the diopters back counter clockwise

until the grain in the image is sharp.

NOTE: We suggest that you focus the diopters during,

daylight with the daylight filters on.

Infra-red illuminators, or IR illuminators, are common in

night vision. The IR light greatly enhances the perfor-

mance of the Night Scout VX while remaining almost

totally invisible to the naked eye. The IR illuminator on the

Night Scout VX is located on the side of the unit. To turn

the IR on, push the IR button and you will see an orange

indicator light come on. It is important to remember that

the IR illuminator is simply an infra red light source, and

like any light source it may loose its efficiency over a

great distance.

NOTE: The IR will automatically turn off when the unit's

main power is turned OFF.

(OPTIONAL)