American Time SiteSync IQ Panduan Instalasi dan Pengoperasian - Halaman 8

Jelajahi secara online atau unduh pdf Panduan Instalasi dan Pengoperasian untuk Jam American Time SiteSync IQ. American Time SiteSync IQ 13 halaman. Wireless clock system gps plus with ethernet & campus tx antenna
Juga untuk American Time SiteSync IQ: Panduan Instalasi Mulai Cepat (2 halaman), Panduan Instalasi dan Pengoperasian (2 halaman), Panduan Instalasi dan Pengoperasian (7 halaman), Panduan Instalasi dan Pengoperasian (6 halaman), Panduan Instalasi Mulai Cepat (2 halaman), Panduan Instalasi Mulai Cepat (2 halaman), Panduan Instalasi Mulai Cepat (2 halaman), Panduan Instalasi Mulai Cepat (2 halaman), Panduan Instalasi Mulai Cepat (2 halaman), Panduan Instalasi Mulai Cepat (2 halaman), Panduan Memulai Cepat (2 halaman), Panduan Memulai Cepat (2 halaman), Panduan Memulai Cepat (2 halaman), Panduan Memulai Cepat (2 halaman)

Operation

For AUTO operation, reference the SiteSync IQ Operation Manual (Part # H004095)

nNote:

Testing Wireless Operation of Signal Circuits

Signal circuits can be controlled manually with the MAN key on the SiteSync IQ System Controller acting as a momentary push-

button switch. To initiate manual wireless control:

Using the SiteSync IQ System Controller

Press MAN, enter User Lock (unless User Lock is disabled) and press OK (unless User Lock is disabled).

If circuit numbers are not highlighted, press 0 to select wireless circuit activation.

nNote:

Press any combination of keys 1-4 to select or deselect the circuits to be turned on with the MAN key. The MAN key can be

pressed as many times as needed. Control of the signal circuits reverts to its previous state (AUTO or OFF) upon exiting

this menu.

Reference Setting Signal Circuit Schedule and Duration in SiteSync IQ System Controller Operation Manual.

nNote:

Upon pressing MAN, a TX will appear in the upper right hand corner to signify that the wireless activation is being

nNote:

transmitted.

The Remote Connect Web Interface may also be used to manually activate circuits via the Circuit tab..

nNote:

SiteSync IQ Wireless Controller

Manual Signal

Select Circuits: 0=WL

Circuit:

1234567

Man=Signal

Installation Manual

7=All

OK=Exit