American Time SiteSync IQ SQA261RSAES Panduan Instalasi dan Pengoperasian - Halaman 9
Jelajahi secara online atau unduh pdf Panduan Instalasi dan Pengoperasian untuk Jam American Time SiteSync IQ SQA261RSAES. American Time SiteSync IQ SQA261RSAES 16 halaman. Wireless digital clock/ elapsed time indicator with code blue
Halaman Cetak
The ATSTCS Control Station can be mounted to a double gang box, 1
mounted up to 30 feet away from the Digital Clock/Timer. The recommended minimum interconnecting field wire size is
#22.8 AWG stranded wire. Ensure that installation conforms to the National Electrical Code and local wiring codes.
CAUTION: Electric Shock Hazard! Ensure that no electrical power is present on any wire before installation.
u
Pull interconnecting field wires into the double gang box.
v
Connect field wiring interconnecting the ATSTCS Control Station with the Digital Clock/Timer to the appropriate wires of
the Control Station. See wiring detail below.
w
Mount the Control Station to the double gang box using the machine screws provided.
CHASSIS
NEUTRAL
120VAC
Typical wiring for the Master Digital Timer with Control Station
© American Time & Signal Co.
Control Station Installation Instructions
/
1
2
RESET
PIEZO
ENTER
BUZZER
inch deep or deeper. The Control Station can be
30 ft. maximum
#22 AWG wire
(minimum) with
1/32" insulation
(minimum)
SET
RUN
START/STOP
INCREMENT
LABEL #
H004273M
nNote: Just for use if installing
master/slave clocks.
8