American Time SiteSynq IQ Panduan Instalasi dan Pengoperasian - Halaman 16
Jelajahi secara online atau unduh pdf Panduan Instalasi dan Pengoperasian untuk Jam American Time SiteSynq IQ. American Time SiteSynq IQ 19 halaman. Wireless digital clocks
Halaman Cetak
Operator Maintenance
Cleaning
Occasionally the Digital Clock/Timer and the Control Station will need to be cleaned. Dampen a soft, nonabrasive
cloth with alcohol or a mild detergent. Do not use abrasives or solvents! Gently wipe the exteriors of the units with
the cloth.
Battery Maintenance
The Digital Clock/Timer uses a single 9vdc Ni-Cad battery rechargeable via an on board charger. This battery retains
the time of day and timer counts when AC power is lost. If each in a series of AC power losses occur for a similar
length of time, the battery can be conditioned to provide only that amount of backup capacity. This phenomenon
is called "memory" effect. The Ni-Cad battery's "memory" can be erased by deeply discharging the battery and
recharging it.
It is recommended that the operator remove AC power from the Digital Clock/Timer once per year for at least
four hours.
System Maintenance
The Digital Clock/Timer and ATSTCS Control Station have been manufactured for years of dependable, reliable
use. However, to assure the reliability of this product, it is recommended that the Digital Clock/Timer be tested at
least every six (6) months with the Control Station and Code Blue contact for operation in accordance with wiring
configurations used.
16
WARNING
Replace the battery only with a 9v Ni-Cad
battery. Do not replace with a regular (primary)
9v transistor battery (i.e., zinc carbon battery,
alkaline battery)! An incompatible battery may
leak or explode, causing equipment damage and/
or personal injury! If battery must be replaced,
contact American Time at 800-328-8996.
Wireless Digital Clocks Owner's Manual
Wireless Digital Clocks Owner's Manual
© American Time
© American Time