Dongguan Grand Plan Mold Industry Co., Ltd. SM-1088B Buku Petunjuk - Halaman 3
Jelajahi secara online atau unduh pdf Buku Petunjuk untuk Peralatan Dapur Dongguan Grand Plan Mold Industry Co., Ltd. SM-1088B. Dongguan Grand Plan Mold Industry Co., Ltd. SM-1088B 9 halaman. Multi-functional kitchen machine
Halaman Cetakthe bowl and during cleaning.
Caution: Ensure that the blender Jug is switched off before removing it from
the stand.
Always operate the device with a closed lid. Always wait for the blades to
come to a standstill before removing the lid.
Appliances can be used by persons with reduced physical, sensory or
mental capabilities or lack of experience and knowledge if they have been
given supervision or instruction concerning use of the appliance in a safe
way and if they understand the hazards involved.
The heating function cannot be used separately.
WARNING: AFTER DETACHING THE ACCESSORY, DO NOT TOUCH
THE MOVING SHAFT.
: The temperature of accessible surfaces may be high when the
appliance is operating.
This appliance is intended to be used in household and similar applications
such as:
– staff kitchen areas in shops, offices and other working environments;
– farm houses;
– by clients in hotels, motels and other residential type environments;
– bed and breakfast type environments.
Never operate the appliance continuously for more than 5 minutes at rated
power.
The appliance should be cool down to the room temperature after each
process.
Be careful is hot liquid is poured into the mixing bowl 7 or blender Jug 2 as it
can be ejected out of the appliance due to a sudden steaming.
Technical Data
Power supply: 110-120V, 60Hz
Power consumption:
1200W [Motor + Heater]
1000W [Motor]
875W [Heater]
Maximum capacity：
Mixing bowl (motor)━ 7.0 liters
Mixing bowl (Cooking, motor + heater) ━
Blender Jug ━ 1.5 liters
Balloon whisk ━ 16
Operation
(8) Pulse button (High speed)
(17) Control panel
(18) Pulse button (Low speed)
(19) On/Off button
(20) Adjusting/selecting switch
Note:
1. The knob is steplessly adjustable.
By turning it clockwise a higher
temperature/speed/time is set, by
turning it anticlockwise a lower
temperature/speed/time will be
set.
2. Push the Fingerprints after setting
for confimation.
3.0 liters