Dongguan Merrock Industry MRK-360B Petunjuk Penggunaan Manual - Halaman 6
Jelajahi secara online atau unduh pdf Petunjuk Penggunaan Manual untuk Penggiling Dongguan Merrock Industry MRK-360B. Dongguan Merrock Industry MRK-360B 9 halaman. Surface grinding machine
Halaman Cetaktransporting. After opening the package and taking out the machine, fix the machine handle with
the screws.
Reference：Fold the handle it's convenient to save the space when transport by vehicle.
B. Fix the grinding blades on the trangle plate for grinding.
C. Take down the trangle plate and fix the sandpaper plate on the bottom with screw, and then put
the sandpaper on the sandpaper plate for grinding.
D. Cover the dust guard with the dustproof ring.
四．Start up and stop
1. Start up
A. For MRK-360B, after the machine connecting the power, press the start switch which bottom
in Green to start the machine, and then turn on the vacuum switch to start the vacuum.
For MRK-350B, after the machine connecting the power, rotate the emergency off button in
clockwise, and then press the green button to start the machine.
B. Please confirm the dustproof ring next to the ground, if it's away of ground, the dust will fly
out when grinding.
C. To avoid overload, must press down the handle make blades which on the bottom are away of
ground, then turn on the green button to start.
D. After start the machine, lay down the blade to lightly touch the ground, at the same time push
the machine front and back, right and left to start grind.
2. Stop
A. For MRK-360B, press the start switch to close the machine, and turn off the vacuum switch
to stop the vacuum.
For MRK-350B, press the emergency off button when something urgent happen during working;
B. Before stopping the machine, let the blades be away of ground, too, and then press the red
button to stop the machine.
五．Attention
Warning：Please pay attention to and comply with below mention for safety operation;
Please don't let people who don' t know how to operate to operate the machine, please take
the instruction with the machine all the time:
1. Before operation
A. Please do not use the machine at outdoors in the rainy day, in a wet place, and place that the
water and oil easily to inflow, otherwise it will get an electric shock accident.
B. Before operation, please confirm: Any damage for wire, connector of the switch, condition of
plug and all screw; blade type, condition of the wear and tear and so on.
C. This machine is used for grinding machine-finishing, especially don't use in the very
accidented ground. When the machine has abnormal shake during using, it may result in breaking
down. And when use in the very rugged ground, the machine will lose balance, and result in the
accident.
D. Any metal like drainpipe and
, please operate after knocking out by hammer or
steel reinforcing
-4-