ASTi Telestra Panduan Pengguna - Halaman 10

Jelajahi secara online atau unduh pdf Panduan Pengguna untuk Peralatan Perekaman ASTi Telestra. ASTi Telestra 10 halaman. Remote control interface
Juga untuk ASTi Telestra: Panduan Pengguna (9 halaman)

Halaman Cetak

ASTi Telestra Remote Control Interface User Guide (Version 1, Revision C)

Using the Telestra System without a Monitor, Keyboard

and Mouse

The Telestra system is conﬁgured to start automatically at system boot. The Telestra federate will

start using /home/hlauser/default.cfg as its conﬁguration ﬁle. If the Telestra federate is started

using the Remote Control Interface, it will NOT be accessible from the console, so no keyboard

input or screen output will be available from the federate. Note however that if a keyboard, mouse,

and monitor are connected then the "hostemu" software can be used to provide local control.

Because the Telestra system is running Linux, it is possible to connect to the system via telnet.

This allows another method of using it without a keyboard, monitor, or mouse.

Warning : If you do inadvertently start-up the Telestra unit, without a keyboard, mouse, and moni-

tor connected Telestra will ONLY be accessible from a remote computer. It is not possible to con-

nect the peripherals once Telestra has started. If you do not have a remote computer capable of

connecting to the Telestra unit, your only option is to switch off the Telestra system. If this is

done, do be aware that it is possible to cause ﬁle errors and possible disk corruption, due to not

being able to shutdown the unit in a controlled fashion. If this occurs the only option may be to

rebuild the disk. ASTi therefore recommends that during all testing of the remote interface opera-

tion a keyboard, mouse and monitor combination be connected to Telestra.