ASTi ASM1005 Panduan Pemilik - Halaman 6

Jelajahi secara online atau unduh pdf Panduan Pemilik untuk Sistem Pembicara ASTi ASM1005. ASTi ASM1005 11 halaman.

Halaman Cetak

TECHNICAL INFORMATION

Specifications

Sound Categories

Sound Environments:

Speaker Compensation:

Five-band parametric EQ

Headphone Jack:

3.5mm stereo

Audio input jack:

3.5mm stereo

USB-A charging ports:

900 mA max (each)

Power requirements:

5 Volts, 2.5 Amps DC max.

when charging other devices

Power consumption while off:

< 0.25 Watts

(typically 0.1 Watts)

TROUBLESHOOTING

Symptom

Possible Cause

No operation when

• Disconnected power plug

POWER button is pressed

• Unit is connected to a switched wall outlet

• Faulty wall outlet

• System needs to be reset

Unit is On, but no sound is heard

• Volume is set too low

• Cable plugged into external audio input?

• Headphones plugged in?

Unit is On, but volume is too low

• Volume is set too low

• In Adaptive Mode?

Volume is too high

Other unexpected behavior

• Try the "Factory Reset" procedure.

If this does not resolve the issue,

call Customer Support

Restore Factory Settings

This procedure will reset the unit to its original

"out of the box" settings.

1. Turn off the Sound+Sleep SE

2. Press and hold the POWER button for about five

seconds, until you hear a small popping sound.

Customer Support

If you have problems or questions, please visit:

www.astisupport.com

Solution

Check the power connection on the bottom of the unit and

at the wall outlet. Make sure that both are firmly seated

Move the unit to an un-switched outlet

Move to a working outlet and power on again

First, power Off the unit, then press and hold the POWER

button for 5 seconds

Press or hold VOLUME-UP button to increase volume

Remove cable from Audio Input Jack, or connect cable to

audio source

Remove headphones, speaker is muted when headphones

are connected

Press or hold VOLUME-UP button to increase volume

In Adaptive Mode the sound will be low when there is no

noise in the room. If you prefer to maintain the sound on high

volume, turn Adaptive Mode Off.

Press or hold the VOLUME-DOWN button to decrease volume

1. Unplug power adapter from the AC outlet

2. Press and hold the POWER button down while plugging

power adapter back into AC outlet

3. Continue to hold POWER button down for 5 seconds

SAFETY, WARRANTY, AND CERTIFICATIONS

Safety Instructions

Read and adhere to all safety and operating instructions before use. Keep this

booklet for future reference.

1. WARNING: Do Not Operate Heavy Machinery or Motor Vehicles While Using

this Device.

2. The unit should be cleaned regularly with a soft, dry cloth. The grill may be

vacuumed to remove excessive dust or particle build-up. Do not use any liquids

or sprays (including solvents, chemicals or alcohol) or abrasives to clean.

3. The unit should not be used near water, such as a bathtub, swimming pool, faucet

or basin to avoid electrocution.

4. Be careful to avoid dropping objects or spilling liquids onto the unit. If liquid is spilled

on the unit, unplug and turn it upside down immediately. Allow it to dry thoroughly

(one week) before plugging it into a wall outlet again. Following these instructions

does not ensure that the unit will be operational.

5. Do not reach for the unit if it has fallen into water. Unplug it immediately at

the wall outlet, and if at all possible drain water before retrieving the unit.

6. The unit should be situated away from heat sources such as radiators, heat

registers, stoves or other appliances (including amplifiers) that produce heat.

7. Avoid placing the unit in areas that are exposed to direct sunlight or close to

heat-radiating products such as electric heaters. Do not place unit on top of

stereo equipment that radiates heat.

8. Avoid placing in areas that are dusty, humid, moist, lack ventilation, or are

subject to constant vibration.

9. The unit may be subject to interference from external sources such as

trans-formers, electric motors or other electronic devices. To avoid distortion

from such sources, place the unit as far away from them as possible.

10. Do not apply excessive force when using any switches or controls.

11. The unit should only be used with the power adapter provided or AA batteries.

12. Power cords should be routed to avoid being walked on or pinched by items

placed on or against them.

13. Unplug the power adapter from the outlet when the unit is unused for long

periods of time or when moving the unit.

14. Do not attempt to service the unit yourself.

One Year Limited Warranty

Adaptive Sound Technologies, Inc., hereinafter referred to as ASTI, warrants this

product against defects in materials and/or workmanship under normal use for

a period of ONE (1) YEAR from the date of purchase by the original purchaser

("Warranty Period"). If a defect arises and a valid claim is received within the

Warranty Period, at its option, ASTI will either 1) repair the defect at no charge,

using new or refurbished replacement parts, or 2) replace the product with a current

product that is close in functionality to the original product. A replacement product

or part, including a user-installable part installed in accordance with instructions

provided by ASTI, is covered by the remaining warranty of the original purchase.

When a product or part is exchanged, the replacement item becomes your property

and the replaced item becomes ASTI's property.

Obtaining Service: To obtain warranty service please call, or email Adaptive

Sound Technologies.

Limits and Exclusions: This Limited Warranty applies only to the ASTI Sound+Sleep

SE unit, ASTI power adapter, ASTI power cable, and ASTI audio cable. It does NOT

apply to any bundled non-ASTI components or products.

This warranty does not apply to: a) damage caused by failure to follow instructions

relating to the product's use or to the installation of components; b) damage

caused by accident, abuse, misuse, fire, floods, earthquake or other external causes;

c) damage caused by service performed by anyone who is not a representative of

ASTI; d) accessories used in conjunction with a covered product; e) a product or part

that has been modified to alter functionality or capability; f) items intended to be

periodically replaced by the purchaser during the normal life of the product including,

without limitation, batteries or light bulbs; or g) any and all pre-existing conditions that

occur prior to the effective date of this Limited Warranty relating to any product sold

"as is" including, without limitation, floor demonstration models and refurbished items.

ADAPTIVE SOUND TECHNOLOGIES, INC. SHALL NOT BE LIABLE FOR INCIDENTAL

OR CONSEQUENTIAL DAMAGES RESULTING FROM THE USE OF THIS PRODUCT, OR

ARISING OUT OF ANY BREACH OF THIS WARRANTY. TO THE EXTENT PERMITTED

BY APPLICABLE LAW, ASTI DISCLAIMS ANY AND ALL STATUTORY OR IMPLIED

WARRANTIES, INCLUDING, WITHOUT LIMITATION, WARRANTIES OF MERCHANTA-

BILITY, FITNESS FOR A PARTICULAR PURPOSE AND WARRANTIES AGAINST HIDDEN

OR LATENT DEFECTS. IF ASTI CANNOT LAWFULLY DISCLAIM STATUTORY OR

IMPLIED WARRANTIES, THEN TO THE EXTENT PERMITTED BY LAW, ALL SUCH

WARRANTIES SHALL BE LIMITED IN DURATION TO THE DURATION OF THIS

EXPRESS WARRANTY.

Some geographic areas disallow the exclusion or limitation of incidental or

consequential damages or the length of an implied warranty. As a consequence,

some of the above exclusions or limitations may not apply to buyers residing in

those areas. This warranty grants specific legal rights to buyers, but other rights

may also be granted, which vary from country to country, state to state, etc.

FCC Declaration

This equipment has been tested and found to comply with the limits for a Class B

Digital Device, pursuant to Part 15 of the FCC Rules. These limits are designed to

provide reasonable protection against harmful interference in a residential installation.

This equipment generates, uses, and can radiate radio frequency energy, and if not

installed and used in accordance with the instructions, may cause harmful interference

to radio communications. However, there is no guarantee that interference will not

occur in a particular installation.

If this equipment does cause harmful interference to radio or television reception,

which can be determined by turning the equipment off and on, the user is encouraged

to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.

• Increase the separation between the equipment and receiver.

• Connect the equipment to an outlet on a circuit different from

the one to which the receiver is connected.

• Consult the dealer or an experienced radio/TV technician for help.

and the ASTI logo are trademarks of Adaptive Sound Technologies, Inc. All other marks

are trademarks or registered trademarks of their respective owners. Use of this product

is protected by US patents #8,243,937, #8,379,870, #8,280,068 and #8,280,067. Additional

patents pending.