Dongguan Winlex Electronics Co. WL-2706 Buku Petunjuk - Halaman 5

Jelajahi secara online atau unduh pdf Buku Petunjuk untuk Headset Dongguan Winlex Electronics Co. WL-2706. Dongguan Winlex Electronics Co. WL-2706 8 halaman. Hye

Halaman Cetak
3 After the headset is fully-charged, the red indicator light will become blue. In this case, please
unplug the travel charger from the power socket and headset.
• Repeated charging and discharging of the headset may lead to the declined battery performance
with the time going on.
• During the charging, please be sure not to make or receive phone calls. Please always receive
calls after the charger is removed from the headset.
When the battery capacity of headset is not adequate, the indicator light of headset will be flashing
red, and you can hear the alarm or "The headset battery capacity is low". If the headset is shut
down during the time when you make phone calls, these calls will be automatically transferred to
your mobile phone.
VI. While Using the Headset
In this section, you will be taught how to turn on and shutdown the headset, create pairing and
connection between headset and mobile phone, and get acquainted with the use methods for
various functions.
• The available functions and features may be varied from mobile phone models.
• Some devices, especially those untested or recognized by the Bluetooth Special Interest Group
(SIG), may be incompatible with the headset.
To ensure the acquisition of the best headset performance, it is required to
• Keep the distance between the headset and the device as close as possible, so as to prevent your
body or other objects from blocking the signal channel.
• The blocking of headset or device may affect its performance, thus, please try to reduce the
blocking.
Bluetooth pairing
1.
{1}Long press on MFB
key for 3 seconds, and the blue light will be lit;
{2}If the key is pressed and held still, the Bluetooth will search the pairing state
(alternate flashing of red/blue lights)
{3} If the paired devices have been found, the name will be WL-2706
{4}After the connection is successful, you will hear the default (the beep sound of
prompt tone) and the blue light will be long lit;
.
2
Receiving/ Hanging up calls
{1}Receiving call: When the bell rings, short press MFB key for 1 second;
{2}Hanging up calls: At the time of calls, short press MFB key for 1 second;
{3}Reject calls: When the bell rings, press and hold MFB key for 2 seconds;