Donmar SH-R-01 Panduan Petunjuk Instalasi - Halaman 9

Jelajahi secara online atau unduh pdf Panduan Petunjuk Instalasi untuk Pemanas Donmar SH-R-01. Donmar SH-R-01 9 halaman. Seat heaters universal: dual temperature carbon fiber: twin comfort pads

Halaman Cetak
Operating instructions for seat heating units – Consumer Guide
"HIGH" Temperature Setting:
- The seat heating system is switched 'ON' by pressing the switch upwards towards the Double wave
located at the top of the face of the switch.
This will engage the seat heater in the High temperature setting.
This is confirmed by the RED color emitted by the LED light.
LOW Temperature Setting:
- The seat heating system is also switched 'ON' by pressing the switch downwards towards the Single
wave located at the bottom of the face of the switch.
This will engage the seat heater in the Low temperature setting.
This is confirmed by the AMBER color emitted by the LED light.
Note:
-The seat heating element is switched "ON" by moving the switch upwards or downwards from its
center OFF position..
-The heating time can vary according to the type of seat cover material and kind of clothing or coat that
is being worn. The heating must be switched to the 'Low' setting in order to avoid overheating, when
the desired temperature has been achieved.
Caution:
The heat will be noticeable within 4 - 5 minutes. The heating must be switched off in order to avoid
overheating, whenever the temperature is too high.
Troubleshooting:
The Heating does not function although it is
switched on.
The LED is not illuminated.
The LED is not illuminated although the
heating is functioning and switched ON.
The Heating does not function although it is
switched on.
The LED is ON.
The distribution of heat in the seat or back
is uneven.
The fuse burns out repeatedly.
03 Jan 2009
C
Verify the fuse and change it if necessary.
Co Consult a Professional Installer if the fuse is in
order.
The LED in the switch is defective
The temperature of the seat cover may be too high due
to the high interior temperature of the vehicle. The
thermostat in the seat heater is connected. Wait until
the seat cover's temperature has fallen and try again.
Switch off the seat heating unit and Consult a
Professional Installation Center.
Check the fuse rating. Consult a Professional
Installation Center if the fuse rating is correct.
9