Donner DEK-610S Panduan Pengguna - Halaman 8

Jelajahi secara online atau unduh pdf Panduan Pengguna untuk Alat Musik Donner DEK-610S. Donner DEK-610S 16 halaman.

4. Synchronization

Press the "SYNC" key, and then the small dot in the rhythm display area of the LCD starts to blink. Then press the chord

keyboard area (1 ~ 19 keys from the left), and the rhythm and playing will be sounded simultaneously. You can also press the

"SYNC" key to press the one-finger chord or multi-finger chord, and then press the chord keyboard area to synchronously

start the performance, or you can choose separately.

5. Use of single finger chord

Under rhythm playing or synchronous mode, press the " SINGLE" chord key, the single finger function of the LCD will be lit,

and then play the chord keyboard area according to the single finger chord fingering method. At this time, the single finger

chord notes will be played together with the rhythm.

6. Use of multi-fingerd chord

Under the rhythm playing or synchronous mode, press the "FINGER" chord key, the multi-finger function of the LCD is lit, and

then play the accompaniment keyboard area according to the multi-finger chord fingering. At this time, the multi-finger

chord tone is playing together with the rhythm.

7. Bass chord

Press the "BASS CHORD" key to change the chord from Bass to Piano..............And so on.

8. Chord closure

To cancel "single or multi-fingered" chord, press the "CHORD OFF" key once. To close the "single or multi-fingered chord note"

and "rhythm" together, press the "Start/Stop" key once to stop the chord and rhythm playing at the same time, and the

single or multi - finger function of the LCD will be off.

9. Use of fill-in function

If you press the key "FILL IN" during the use of rhythm, the piano will automatically insert a strong intermezzo, and then

continue the rhythmic accompaniment.

10. Change the tempo

The rhythm speed is set to 120 beats/min at startup. Press the rhythm speed key "TEMPO+" or "TEMPO-" to speed up or slow

down the rhythm speed, and the rhythm speed can be adjusted from 30 beats/min to 240 beats/min. Press the speed keys

"TEMPO+" and "TEMPO-" at the same time to return to 120 beats/min.

11. Rhythm volume

Press the rhythm volume control button "RHYTHM VOL-" during the playing rhythm to reduce the rhythm volume. The

minimum value can be set to "1".Press the rhythm volume control button "RHYTHM VOL+" to increase the rhythm volume, the

maximum can be set to "10".

12. Chord volume

Press the chord volume control button "CHORD-" to reduce the chord volume during the rhythm and chord. The minimum

value can be set to "1".Press the chord volume control button "CHORD+" to increase the chord volume, the maximum can be

set to "10".

(VI). Registration memory

According to the needs of the performer, select the timbre or rhythm, chord and speed you need before playing. Press the

key of "MEMORY " and then press one of the keys of "Memory 1" or "memory 4". At this time, the current timbre or rhythm will

be recorded, and the corresponding system can be updated and called at any time. After the state has been memorized,

simply press one of the "memory 1" or "Memory 4" keys, then read out the required timbre or rhythm and play.

Note: The memorized data will be cleared to zero each time the machine is turned off.