Donner Green Land Series Panduan Pemilik - Halaman 2
Jelajahi secara online atau unduh pdf Panduan Pemilik untuk Penguat Donner Green Land Series. Donner Green Land Series 2 halaman.
Halaman Cetak
sturdy performance. The aluminum alloy
casing and all metal footswitch ensure
road worthy reliability.
Connections & Controls
a
d
e
f
g
g
g
h
c
i
DC 9V Jack:
a
For power supply, use a 9-volt DC
regulated by AC adapter, 500mA
(plug polarity is positive on the barrel
and negative in the center).
Input Jack:
b
1/4" mono audio jack, for connecting
instrument.
Output Jack:
c
1/4" mono audio jack, for connecting
to an amplifier.
LEVEL Knob:
d
Adjusts the effect output.
REVERB Knob:
e
Adjusts the reverb level.
GAIN Knob:
f
Adjusts the effect gain amount.
LOW/MIDDLE/HIGH Knob:
g
b
3-band EQ for tone shaping.
h
CAB SIM Button (with LED):
Press to switch the cab simulator
on/off (the LED will continue flashing
while the cab simulator is on). Press
and hold to switch between the two
channels:
Channel A: based on Fender
Bassman* (Clean, green LED);
Channel B: based on Marshall
JTM45* (Crunch, red LED).
Footswitch Modes:
i
The footswitch can be configured as
an on/off switch (mode 1) or an A/B
channel switch (mode 2). The default
is mode 1. To switch to mode 2, press
and hold the footswitch for 2 seconds
when the pedal is on. The LED will
flash to indicate mode selection. In
mode 2, the pedal cannot be
bypassed; tapping the footswitch means
toggling between channels. To switch
back to mode 1, press and hold the
footswitch for 2 seconds again.
Features
●Convenient compact size
●Digital circuit design
●Two-channel preamp with organic
tube amp sound
●Sounds based on Fender Bassman*
and Marshall JTM45*
●Built-in reverb and cabinet simulator
●Reliable aluminum alloy casing
Specifications
Power Requirement: 9V DC center
negative
Current Consumption: 200mA
Dimensions: 42x93.5x52mm
Weight: 230g
www.donnerdeal.com
*The mentioned manufacturers and product
names are trademarks or registered
trademarks of the respective owners, which
were used merely to identify the sound
character of this product.