AMERICANA EHB-1000R Buku Petunjuk - Halaman 6
Jelajahi secara online atau unduh pdf Buku Petunjuk untuk Peralatan Dapur AMERICANA EHB-1000R. AMERICANA EHB-1000R 16 halaman. Licuadora
CAUTION:
NEVER IMMERSE THE ENTIRE HAND BLENDER OR ITS MOTOR-
END IN WATER OR ANY OTHER LIQUID.
ALWAYS SHUT THE BLENDER OFF, WAIT UNTIL THE BLADES
STOP SPINNING, AND UNPLUG FROM THE OUTLET BEFORE
BEGINNING TO CLEAN.
NEVER CLEAN THE SURFACE OF YOUR HAND BLENDER WHILE IT IS
PLUGGED INTO THE ELECTRICAL OUTLET.
THE HAND BLENDER HAS NO USER SERVICEABLE PARTS, DO NOT
ATTEMPT TO REPAIR. IF THE HAND BLENDER IS
MALFUNCTIONING IN ANY WAY OR IF ANY PART GETS DAMAGED,
CALL CUSTOMER SERVICE OR YOUR AUTHORIZED SERVICE
AGENT.
DO NOT USE ABRASIVE SOAPS, DETERGENTS, OR CLEANING
MATERIALS TO CLEAN ANY PART OF THIS APPLIANCE.
1.
Make sure the unit is off and unplugged from your electrical outlet.
2.
Place blade-end of unit under hot running water immediately after
blending, for an easy clean-up.
3.
For deep cleaning, take any empty, clean bowl and fill with warm
soapy water about half way or enough to cover the blades.
4.
Insert the hand blender into the bowl and run for a few seconds.
5.
Rinse out the container and the blade-end of the blender with warm
water and dry thoroughly.
6.
Wipe motor-end of unit with a clean, damp cloth.
7.
Always dry all parts of the Hand Blender thoroughly before cleaning
or storing.
TIPS
The hand blender performs its tasks very quickly. Stop blender
frequently to check the consistency before contents become too fine
or over blended.
Cut all solid foods such as cooked meats, vegetables and fruit into 1 inch
pieces before blending.
It will sometimes be necessary to stop blending and remove the blade-
end from the ingredients and reinsert several times before mixture
becomes smooth.
To avoid splattering, do not lift unit out of ingredients while the motor
is still on.
For fluffy shakes, aerate upper part of mixture by raising blender from
bottom of container. This is great for turning heavy cream into fluffy
whipped cream.
Avoid getting mixture up past the joining section of the blender shaft
and the power handle.
HOW TO CLEAN
5