AMERICANA PERGOLA Manual Petunjuk Perakitan - Halaman 8

Jelajahi secara online atau unduh pdf Manual Petunjuk Perakitan untuk Tenda AMERICANA PERGOLA. AMERICANA PERGOLA 11 halaman.

STEP 4 - OPTIONAL COLUMN KITS: ROUND WRAP KIT

-Snap two column sections together by fitting the tongues into the grooves and lightly tapping with the heel of your hand.

-Stand the sections on end and snap the open ends together around a post (see Fig. 4-7).

-Anchor the bottom of the column with three lower column brackets, (3) lag screw inserts, (3) 1/4" x 1 1/2" lag screws into the

surface, and (3) #8 x 3/4" HWH #2 Tek screws into the column (see Fig. 4-8).

3" Sq. Post

Column

Section

Fig. 4-7

-Once the column sections are secure, assemble a column cap around the bottom of the column.

-Attach the column cap to the column using (6) #8 x 3/4" HWH #2 Tek screws as shown (see Fig. 4-9).

-Assemble another column cap around the top of the column.

-Push the column cap up until flush with the bottom of the header and attach to the column plate using (4) #8 x 3/4" HWH

#2 Tek screws (see Fig. 4-10).

-Attach the column cap to the column using (6) #8 x 3/4" HWH #2 Tek screws as shown (see Fig. 4-10).

Column

#8 x 3/4" HWH

#2 Tek Screw

Column Cap

Fig. 4-9

Column

Lower Column Bracket

#8 x 3/4" HWH #2 Tek Screw

Fig. 4-8

Header Assembly

Column Plate

Column Cap

Column

Fig. 4-10

1/4" x 1 1/2" Lag Screw

Lag Screw Insert

#8 x 3/4"

HWH #2

Tek Screw