Donner & Blitzen 6.5FT WESTCHESTER SLIM CASHMERE PINE Panduan Pemilik - Halaman 2

Jelajahi secara online atau unduh pdf Panduan Pemilik untuk Pohon Pinus Buatan Donner & Blitzen 6.5FT WESTCHESTER SLIM CASHMERE PINE. Donner & Blitzen 6.5FT WESTCHESTER SLIM CASHMERE PINE 3 halaman.

Halaman Cetak
ASSEMBLY INSTRUCTIONS FOR TREE STAND
1.
Tree stand consists of a
metal stand and a single eye
bolt. (See Fig.1)
Fig.1
3.
Insert an eye bolt and screw
into the hole. (See Fig.3)
Fig. 3
ASSEMBLY INSTRUCTIONS
1. Before you start to assemble your tree, place the tree stand (E) on a level surface.
2. Assemble tree stand according to the assembly instruction for the tree stand.
3. Insert the bottom section (C) of the trunk into the assemble stand (E). (See Fig.1)
4. Insert the middle section (B) into the bottom section (C), top section (A) into the middle section (B).
(See Fig.2, 3)
5. Insert the plug of the top section (A) into the end connector of the middle section (B), the plug of the middle
section (B) into the end connector of the bottom section (C).(See Fig.5)
6. Open all the branches. (See Fig.4)
2.
Open the stand to a 90 degree angle
until the hole lines up with the hole
on the tube. (See Fig.2)
Fig. 2
4.
Insert the tree into the stand and
adjust accordingly. The tree should
be straight and balanced correctly.
(See Fig.4)
Fig. 4
1
7. Allow the branches to fall into place or gently pull branches up and out. When adjusting branches be sure that
all wires are free of branch hinges. (See Fig.6)
8. Shape the branches. Starting with tips closest to the pole, shape one tip to the right, one to the left and one at the
center of the main stem. Repeat pattern for each branch.
9. Connect the plug of the cord from bottom section (C) to the wall outlet. Now your tree should be completed
with all lights illuminated. Your tree is ready to be decorated and enjoyed.
IMPORTANT SAFETY INSTRUCTIONS
READ AND FOLLOW ALL SAFETY INSTRUCTIONS
a) Do not use seasonal products outdoors unless marked suitable for indoor and outdoor use. When products are
used in outdoor applications, connect the product to a Ground Fault Circuit Interrupting (GFCI) outlet. If one is
not provided, contact a qualified electrician for proper installation.
b) This seasonal use product is not intended for permanent installation or use.
c) Do not mount or place near gas or electric heaters, fireplace, candles or other similar sources of heat.
d) Do not secure the wiring of the product with staples or nails, or place on sharp hooks or nails.
e) Do not let lamps rest on the supply cord or on any wire.
f) Unplug the product when leaving the house, when retiring for the night, or if left unattended.
g) This is an electric product – not a toy! To avoid risk of fire, burns, personal injury and electric shock it should
not be played with or placed where small children can reach it.
h) Do not use this product for other than its intended use.
i) Do not hang ornaments or other objects from cord, wire, or light string.
j) Do not cover the product with cloth, paper or any material not part of the product when in use.
k) This product is equipped with push-in type lamps. Do not twist lamps.
l) This product employs overload protection (fuse). A blown fuse indicates an overload or short-circuit situation. If
the fuse blows, unplug the product from the outlet. Also unplug any additional strings or products that may be
attached to the product. Replace the fuse as per the user servicing instructions (follow product marking for
proper fuse rating) and check the product. If the replacement fuse blows, a short-circuit may be present and the
product should be discarded.
m) Read and follow all instructions that are on the product or provided with the product.
SAVE THESE INSTRUCTIONS
TROUBLE SHOOTING (If Lights Do Not Work):
1. If entire tree does not light, make sure extension cord plug is securely inserted into a working electrical
outlet.
2. Check whether all bulbs are tightly fixed inside the lamp holder.
3. If a bulb is blown or broken, replace the faulty bulb according to bulb replacement instructions below.
4. If the fuse in the light set plug or extension cord plug is blown, replace the blown fuse according to fuse
replacement instructions below.
5. If you are still experiencing problems with the tree please call us.
CAUTION! – ALWAYS UNPLUG YOUR TREE FROM ITS POWER
SOURCE BEFORE ATTEMPTING EITHER FUSE OR BULB
REPLACEMENT.
2