Astonica 50104287 Buku Petunjuk - Halaman 2

Jelajahi secara online atau unduh pdf Buku Petunjuk untuk Perabotan Dalam Ruangan Astonica 50104287. Astonica 50104287 2 halaman. Flynn 56'' rectangular dining table

Halaman Cetak
PARTS & HARDWARE LIST
PART #
A
Table Top
B
Table Leg
C
Leg Support Crossbar
D
Bolt
E
Washer
F
Hex Key
Parts Detail
A
C
D
Carefully remove the contents from the package. If any parts are missing do not
attempt to use the product until they have been obtained and correctly installed.
NOTE: This product is intended for residential, non-commercial use.
DESCRIPTION
B
E
F
1
QUANTITY
CAUTION: Do not over tighten fasteners.
1
2
1. (SEE FIGURE 1) Place table top (A)
upside down on a non scraching surface.
1
12
12
1
2. (SEE FIGURE 2) Turn table leg (B)
upside down so that holes at the top
of leg line up with the holes underneath
table top (A). Secure the leg (B) to the table
top (A) using bolt (D) and washer (E) with the
hex key (F). Do not tighten the bolt
completely at this time. Repeat step 2 with
other table leg (C).
3. (SEE FIGURE3) Place leg support crossbar (C)
between the table legs (B) and align the holes
in the ends of the leg support crossbar with
the hole in the center of the legs. Secure the
crossbar to the legs using bolt (D) and
washer (E) with the hex key (F).
4. (SEE FIGURE 4) Turn the assembled table
right side up. Tighten all bolts securely
ASSEMBLY INSTRUCTIONS
Figure 1
A
Figure 2
D
E
A
Figure 3
D
B
Figure 4
2
F
B
E
C