Astonica 50105347 Buku Petunjuk - Halaman 2

Jelajahi secara online atau unduh pdf Buku Petunjuk untuk Perabotan Dalam Ruangan Astonica 50105347. Astonica 50105347 2 halaman. 3-piece poly resin bistro set

Halaman Cetak
PARTS & HARDWARE LIST
PART #
DESCRIPTION
A
Chair Back
B
Chair Seat
C
Chair leg
D
Chair Center Brace
E
Table Top
F
Table Leg
G
Table Center Brace
H
Small Nut
I
Medium Nut
Large Nut
J
Plastic Spanner
K
A
D
G
H
Carefully remove the contents from the package. If any parts are missing do not attempt to
use the product until they have been obtained and correctly installed.
IF YOU HAVE ANY PROBLEMS OR QUESTIONS CONCERNING THIS PRODUCT,
DO NOT RETURN IT TO YOUR RETAILER. CONTACT CUSTOMER SERVICE AT
1-888-424-3354.
Caution: Do not over tighten fasteners.
QUANTITY
11
22
C
B
E
F
J
K
I
1. (See Figure 1) Insert studs on chair back (A)
through holes in chair seat (B) and secure
the back with 2 large nuts (J) and
2 medium nuts (I).
2
2
2. Insert studs on one chair leg (C) into chair
seat (B) and secure with 2 medium nuts (I)
8
and 1 large nut (J) with spanner. Repeat
2
for the other three legs. Be careful not to
1
over tighten the nuts.
3
1
4
1
3. (See Figure 2) Place the chair brace's (D)
threaded studs thru the tab on chair leg (C).
Turn the chair upside down and fasten the
brace (D) with medium nut (I) using the
plastic spanner to tighten nuts on all four
legs. Be careful not to over tighten the nuts.
4. (See Figure 3) Position table top (E) upside
down on a clean surface. Place the 2 holes
at the top of the leg (F) on the plastic
threaded studs on the bottom of the table (E)
and secure with large nuts (J) using the
plastic spanner (K) to tighten. Be careful
not to over tighten the nuts.
5. Position table right side up. Place the table
center brace's (G) threaded studs thru the
tab on table leg (F). Turn the table upside
down and fasten the brace (G) with medium
nuts (I) using the spanner on all four legs.
Tighten all fasteners securely. Be careful
not to over tighten the nuts.
Figure 1
A
C
B
B
I
A
Figure 2
K
D
C
C
D
Figure 3
F
K
plastic studs
J
E
F
F
I
G
J
I
G