Astor-Bannerman ABW6SP Panduan Pemilik & Panduan Instalasi - Halaman 6

Jelajahi secara online atau unduh pdf Panduan Pemilik & Panduan Instalasi untuk Produk Pipa Astor-Bannerman ABW6SP. Astor-Bannerman ABW6SP 12 halaman. Height adjustable basin

Halaman Cetak

Please Note: Due to the complexity of different building methods Astor

Bannerman do not supply installation fixings and anchors.

Important: The attachment rail is the main load bearing fixing; it is vital that it is secured

•

Measure 100mm up from the floor along the centre-line of the final position of the unit; using a

spirit level, draw a horizontal line at least 50mm long.

•

Place the attachment rail with the open lip upwards, on the line. With a pencil mark two of the

holes for the rail at least 50mm apart

•

Using a masonry bit, drill two 6mm full depth pilot holes at the marked positions and then open up

in order to accept the Anchors.

•

Fix the attachment rail, open lip

uppermost to the wall using suitable

fixings.

•

Ensure that the rail is level using a spirit

level (adjust to suit) and check that it is

secure.

•

With assistance, place the rise and fall unit

onto the wall ensuring that the two short

rails welded to the unit engage with the

one on the wall.

•

Ensure that the unit is level, then mark

the wall through the remaining three

attachment points, two on the lower

horizontal beam and one on the upper

horizontal beam

•

Remove the unit from the wall and at the

three marked positions drill three 6mm full-depth pilot holes.

•

Open the upper hole to accept a plastic wall plug.

•

Fit supporting Anchors in the two lower holes

•

Place the rise and fall unit back onto the wall-mounted rail. Fully fix the rise and fall unit to the

wall.

Ensure that the mains supply to the junction box on the wall is switched OFF.

•

Electrically connect the rise and fall unit to fused outlet behind the unit with the three-core cable

supplied.

Lower the arms and ensure the handset is fitted BEFORE switching the power on

•

correctly .

Page: 6

Centre of fixing holes

1200mm above Floor

Version : 11-04-016