DAB ACTIVE DRIVER M/T 2.2 Manual Pemrograman - Halaman 6
Jelajahi secara online atau unduh pdf Manual Pemrograman untuk Pengontrol DAB ACTIVE DRIVER M/T 2.2. DAB ACTIVE DRIVER M/T 2.2 10 halaman.
Halaman Cetak
rt >ROTATION
M/M 1.1).
This allows you to change the direction of rotation without rewiring the power supply to
the motor.
To access this setting, press [mode], [set] and [-] simultaneously for five seconds,
press [mode] until the display indicates
set. The rotation can be changed by altering this parameter to
the rotation. This setting will not appear when programming the AD M/M 1.1.
Once the setting has been made, pressing the [mode] key will move the display to the
next settable parameter, pressing [set] will return the indication to the operating mode
of the system (Go or Sb)
Fn >FREQUENCY
50
This is pre set to
and should not be changed.
Once the setting has been made, pressing the [mode] key will move the display to the
next settable parameter, pressing [set] will return the indication to the operating mode
of the system (Go or Sb)
od>OPERATING MODE
cell.
To access this setting, press [mode], [set] and [-] simultaneously for five seconds,
press [mode] until the display indicates
set. This condition can be changed by altering this parameter to
Once the setting has been made, pressing the [mode] key will move the display to the
next settable parameter, pressing [set] will return the indication to the operating mode
of the system (Go or Sb)
rP>RESTART PRESSURE
before the ACTIVE DRIVER restarts, and it much like the differential setting in a
pressure switch.
To access this setting, press [mode], [set] and [-] simultaneously for five seconds,
press [mode] until the display indicates
pre set and is 0.5 Bar. This condition can be changed by altering this parameter up to
1.5
. A higher setting can prevent cycling due to leaks in the system.
Once the setting has been made, pressing the [mode] key will move the display to the
next settable parameter, pressing [set] will return the indication to the operating mode
of the system (Go or Sb)
, direction of rotation of the motor, (not applicable to AD
rt
, and then flashes to
, Sets the frequency of the motor.
, this refers to the presence of a pressure
od
, and then flashes to
, this to the allowable pressure drop
rP
, and then flashes to
6
00
which is the pre
01
, which will reverse
00
which is the pre
01
.
0.5
which is the