Door Knox XVDP500 Manual - Halaman 3
Jelajahi secara online atau unduh pdf Manual untuk Sistem interkom Door Knox XVDP500. Door Knox XVDP500 6 halaman. Entry system
Halaman Cetak5. Fit the monitor backplate to the wall
as shown on the right. The monitor
can now be clipped onto the backplate.
Connecting Camera Unit
6. Fit the camera bracket to a post
or wall. This provides protection
from the weather.
audio ground video VCC 12vDC
Warning!
The order of the coloured wires may
differ to those in the picture. Ensure
you wire according to the text.
Email:
Door Entry System - Door Knox
Fixing holes
7. Connect the white extension cable to the camera
ensuring the wires are connected as
shown. Press grey square above wire entry to
enter cable.
8. Note that Connection 1 is
Be aware that connections for video and 12vDC
are reversed on monitor.
9. Connect Electronic Lock to 5 and 6. Note that
a zero volt switch is momentarily activated when
pressing the unlock button. If you have a voltage
controlled solenoid and/or require a latching
connection, you will have to use an appropriate
interface.
Audio
Connection 2 is
Ground
Connection 3 is
Video
Connection 4 is
Last Revised: 07/10/2015
Doc XVDP500
VCC 12v DC