Acer XV253Q Panduan Penyuluhan Siklus Hidup - Halaman 10

Jelajahi secara online atau unduh pdf Panduan Penyuluhan Siklus Hidup untuk Monitor Acer XV253Q. Acer XV253Q 15 halaman.

Preparation before assemble:

1.Clean the room for work

2.Identify the area for material

3.Prepare the implement, equipment, materials as bellow：

1) working table

Screw-driver: Philips-head screwdriver, Hex-head screwdriver

3) Knife

4) Glove

5) Cleaning cloth

6) ESD protection

After unplugging the power cord, the power board still have power energe. Please pay attention when

disassembling/assembling.

Assemble I/F BD and

P/BD from SHD.

PICTURE 1

P/BD

PICTURE 4

I/F BD

Assemble Panel to MF

PICTURE 1

4.2 Assembly Procedures

Before Disassembling & Assembling, monitor need to be put on the sponge and the

Insulation glove must be wore during the process.

Put the SHD on the worktable. Locate the P/BD into the SHD.

Insert FFC LVDS, P/BD wire and USB wire to the I/F BD.

Locate the I/F BD into the SHD as picture 2.

Insert USB wire to USB-BD and locate the USB-BD into the SHD; then lock 7 screws as

picture 3.

Lock 1 screw and assemble the Mylar on the SHD as the picture 4.

Take the Panel and insert lamp wire to panel marked as picture 1.

Assemble the MF to the panel and lock 9 screws to the MF as picture 2.

Stick 1 piece of adhesive tape on the little connector of lamp wire as picture 3.

PICTURE 2

ACER XV253Q

PICTURE 3