Akva Modulex Manual - Halaman 3
Jelajahi secara online atau unduh pdf Manual untuk Perabotan Dalam Ruangan Akva Modulex. Akva Modulex 3 halaman.
Halaman Cetak
The lower part of the cover is positioned with the AKVA logo at the foot end. The top cover
is zipped off and put aside. The fixing paddles are put through the holes in the lower part of
the cover and fixed to the bottom plates.
At first the long sides of the foam frame are placed in the cover, then the head and food end
parts.
Modulex has sloaping sides, and Modulex Q has straight sides.
Shown here is the Modulex:
The heater(s) is positioned, and the wire is led under the foam frame and through the hole
in the lower part of the cover. (See assembly instructions Akva Vital Electronics heater
before installing the heater.)
The safety liner Zipliner is placed in the bed and zipped onto the cover.
If this is a bed with a dual mattress system the divider is now placed in the middle.
The water mattress(es) is placed in the safety liner. (See instructions for water mattresses.)
After filling the mattress, removing the surplus of air and adding one or two bottles of Long
Life the top cover is zipped on the lower part of the cover. (See instructions for covers.)