DoorHan SHAFT-120 Panduan Instalasi dan Pengoperasian - Halaman 9
Jelajahi secara online atau unduh pdf Panduan Instalasi dan Pengoperasian untuk Pembuka Gerbang DoorHan SHAFT-120. DoorHan SHAFT-120 12 halaman.
Juga untuk DoorHan SHAFT-120: Panduan Instalasi dan Pengoperasian (12 halaman)
Halaman Cetak6. ADJUSTMENT OF EXTREME POSITIONS
6.1. CLOSE POSITION (RED CAM)
Coarse adjustment
Make sure, that the operator is fixed rigidly; put the door in completely closed position.
Loosen the screws for coarse adjustment of red cams, then turn them so, that the microswitches are pushed, then tighten
the screws.
Open and close the door, make sure, that the red cams push the microswitches.
Fine adjustment
Turning the fine adjustment screw, adjust the closed position of the door.
Open and close the door, make sure, that the red cams push the microswitches and the door remains in the desired
position.
Clockwise turn of the screw causes earlier actuation of the limit switch, counterclockwise turn of the screw causes later
actuation respectively.
Open and close the door, make sure, that the red cams push the microswitches and the door stops in the required position.
6.2. OPEN POSITION (GREEN CAM)
Coarse adjustment
Make sure, that the operator is fixed rigidly; put the door in fully closed position.
Loosen the screws for coarse adjustment of green cam, then turn them so, that the microswitches are pushed, then
tighten the screws.
Close and open the door, make sure, that the green cams push the microswitches.
Fine adjustment
Turning the fine adjustment screw, adjust the closed position of the door.
Clockwise turning of the screw causes earlier actuation of the limit switch; counterclockwise turning of the screw causes
later actuation of the limit switch.
Open and close the door, make sure, that the green cams push the microswitches and the door stops in the required position.
ADJUSTMENT OF EXTREME POSITIONS
9