DoorHan DH1500 Panduan Pengguna - Halaman 2

Jelajahi secara online atau unduh pdf Panduan Pengguna untuk Sistem pembukaan pintu DoorHan DH1500. DoorHan DH1500 8 halaman. Rapid rolling door operator

Halaman Cetak

1. SAFETY INSTRUCTIONS

It is important that you read all the following instruction:
• Read carefully this manual.
• The door operator should be installed and put into operation by qualified personnel. Otherwise, serious personal
injury or property damage may occur.
•
It is necessary to install the mechanical stops on guides, in order to avoid the exit of the door from the guides.
•
The operator motor may only be disengaged with the door closed. This must be carried out by specialist personnel
for maintenance purpose only.
Keep remote controls or button switch away from children, to prevent the door operator from being activated
•
involuntarily.
•
Locate any fixed control: within sight of door but away from all moving parts of the door and at a height of more
than 1.4m above the ground to avoid children reaching it.
The operator should be switched off before repairing it or opening its cover.
•
When opening or closing the door, do not attempt to walk or drive through the door.
•
The door should only be operated when it can be observed to avoid accidents.
•
It is forbidden to use the crank, when the electric operator runs, that can cause damage of the motor. Withdraw
the crank before running the operator.
•

2. GENERAL DESCRIPTION

•
The rapid rolling door can isolate, open quickly, provide an emergency exit, protects your environment from humidity, dust
or other external factors and saves energy.
•
Main technical parameters:
Model
Power supply
Motor rotation speed
Reduce ratio
Motor power
Rated output torque
Electromagnetic
Output shaft aperture
Work duty
Environment temperature
Dimensions
Main unit weight
Main function:
Main function:
Main function:
Main function:
•
Use soft curtain door.
•
Because of operating speed, they reduce energy costs and create more comfortable working condition.
•
Uses newly encoder to replace the limit switch to ensure high precision, safe and reliable.
•
The control unit regulates all the necessary functions such as soft start & soft stop, open priority, automatic close.
•
Wiring terminals for infrared photocell, loop detector and radar etc.
2
DH1500(DELTA Connection)
（
（
220V/60Hz
DH1500 Rapid Rolling Door Operator
DH1500S(STAR Connection)
380V/50Hz
2880rpm
1:30 (1:15)
1.5kw
60N.m
DC99V
￠25mm
S2-15min/ S3-50%
-20
~+45
0
0
462*230*165 mm
20 kg