Canon PIXMA MP228 Panduan Memulai Cepat - Halaman 6

Jelajahi secara online atau unduh pdf Panduan Memulai Cepat untuk Semua dalam Satu Printer Canon PIXMA MP228. Canon PIXMA MP228 36 halaman. Canon digital camera user manual

Halaman Cetak

Preparing the Machine

Be sure to read your setup sheet first for setting up your machine and getting it ready for use.

Unpack the machine

Please confirm the included items against the illustration printed on the lid of the packing box.

Important

A USB cable is necessary to connect the machine with your computer.

Turn on the machine.

Caution

Be sure to remove the tapes and protective material before you turn on the machine.

Note

The tape or the protective material position is subject to change.

If an unintended language is displayed on the LCD, press the Back button to return to the

LANGUAGE SETTING screen.

Prepare the FINE Cartridges.

Caution

Do not touch internal parts other than the FINE Cartridge Holder.

Do not drop or shake FINE Cartridges as this may cause the ink to leak out and stain your

clothes and hands.

Important

If the Scanning Unit (Printer Cover) is left open for more than 10 minutes, the FINE Cartridge

Holder moves to the right side. Close and reopen the Scanning Unit (Printer Cover) to return the

holder to the left.

Do not touch the electrical contacts or Print Head Nozzles on a FINE Cartridge. The machine

may not print out properly if you touch it.

Do not reattach the protective tape once it has been removed.

Handle the removed protective tape carefully to avoid getting your hands dirty or staining

surrounding work area.

Install the FINE Cartridges.

Be sure to use the machine with both Black and Color FINE Cartridges.

Otherwise, the machine cannot print. When either of ink runs out while printing, you can

select to use either Color or Black ink as a printer driver setting. However you must use the

machine with both Black and Color FINE Cartridges installed regardless of the printer driver

setting.

Important

Make sure that all the FINE Cartridges are installed in the correct position. The machine cannot

be used unless all the FINE Cartridges are installed.

Once you have installed the FINE Cartridges, the message "CART. RETURN" is displayed on

the LCD. Wait until the copy standby screen is displayed before proceeding. It takes about one

to two minutes.

Note

An error message will be displayed on the LCD if a FINE Cartridge is not installed properly. Open

the Scanning Unit (Printer Cover) and make sure that position of all the FINE Cartridges is

appropriate.

Preparing the Machine