DAC Pedal Pro Panduan Memulai Cepat - Halaman 4

Jelajahi secara online atau unduh pdf Panduan Memulai Cepat untuk Penguat DAC Pedal Pro. DAC Pedal Pro 7 halaman.

DAC Pedal Pro

Configuring

Before you can begin to use DAC Pedal Pro, the foot control must be assigned hotkey functions. When you

first open the application, it will ask you to select whether you are using a 3 or 4 pedal foot control. After

that the main screen will open (4 pedal configuration shown below).

Each pedal on the foot control can be assigned a single

keystroke or a combination of keystrokes for when it is

pressed (the Depress value) and when you let off the

pedal (the Release value). You can leave a field blank

if desired and no function will be assigned to it.

Pedal Numbers

Each pedal on the foot control is assigned a number. To

know what number it is, simply press that particular

pedal and the pedal number box will light up. For

example, if the pedal lights up box 2, then to configure

that pedal you will set up the fields for section 2.

Label

The Label field allows a name to be assigned to each

pedal's hotkeys. This allows you to easily determine

what function you have assigned to that pedal.

Depress

The Depress field holds the keystroke(s) that will be

sent when that pedal is pressed down. If you wish to

enter a special key (e.g. delete) select it from the

dropdown menu beside the field.

Release

The Release field holds the keystroke(s) that will be sent when that pedal is released (when you take your

foot off it). If you wish to enter a special key (e.g. delete) select it from the dropdown menu beside the

field.

Changing Foot Control Styles

If you have a 3 pedal foot control and have now changed to a 4 pedal style (or vice versa), you can easily

make this change from the menu bar. Simply click on Pedal Style and from the drop-down menu select your

new style. Pedal Pro automatically adjusts the number of hotkey fields available based on your selection.

www.dacsolution.com

Pg. 4

visit us online @