Canon PIXMA MP990 Panduan Instalasi Jaringan - Halaman 3

Jelajahi secara online atau unduh pdf Panduan Instalasi Jaringan untuk Semua dalam Satu Printer Canon PIXMA MP990. Canon PIXMA MP990 19 halaman. Installing your multifunction on additional computers
Juga untuk Canon PIXMA MP990: Manual Fungsi (12 halaman), Panduan Pengaturan Jaringan (16 halaman), Spesifikasi Teknis (2 halaman), Manual Jaringan (24 halaman), Manual Jaringan (19 halaman), Manual (10 halaman), Panduan Instalasi (8 halaman)

An "Ad-hoc connection," which establishes a direct connection to the computer over a wireless

connection without using an access point, is not supported.

Be sure to prepare an access point

Important Information You Need Before Adding Your Multifunction

The following information is required to connect to your access point or router.

•

Access Point Name/Network Name:

Also referred to as SSID. A name to identify the specific access point.

•

Network Key:

Also referred to as encryption key, WEP key or VVPANVPA2 passphrase, Pre-Shared

key.

A password required to set to prevent unauthorized access to communication.

Check your access point or route for the following information, and then write it down.

NOTE: For details on how to check the following information, refer to the manual of your access

point or router, or contact its manufacturer.

Step One

Use the Easy-Scroll Wheel* (A) to select Settings, and then press the OK button.

*Easy-Scroll Wheel location varies according to model MP640 pictured in examples below.

Page 3