Canon PIXMA MX330 Panduan Memulai - Halaman 30
Jelajahi secara online atau unduh pdf Panduan Memulai untuk Semua dalam Satu Printer Canon PIXMA MX330. Canon PIXMA MX330 37 halaman. Cartridge reset
Juga untuk Canon PIXMA MX330: Manual (4 halaman)
Halaman Cetak
- 1. Getting Started
- 2. Remove the Protective Material
- 3. Connect the Telephone Line
- 4. Turn the Power on
- 5. Install the FINE Cartridges
- 6. Set up for Fax Reception
- 7. Install the Software
- 8. Loading Paper
- 9. After Installing the Machine
- 10. Try Using the Machine
- 11. Try Copying
- 12. Print Photos from a Computer
- 13. Send Faxes
- 14. Maintenance
- 15. Specifications
Try Copying
You can copy a document by simply placing it on the Platen Glass and pressing the Start button.
This section explains with Plain Paper. For various copying procedures, refer to "Copying" in the on-screen manual: Basic Guide.
1
Load a sheet of A4 or Letter-
sized Plain Paper.
•
For details, refer to "8 Loading
Paper" on page 24.
•
The machine may make
operating noise when feeding
paper. This is normal operation.
2
Ａ
Open the Document
Place the document face-down and align it
Cover (A).
with the Alignment Mark (B).
•
•
3
B
Do not place any objects weighing more than 4.4
lb / 2.0 kg on the Platen Glass (C).
Do not press or put weight on the original with
pressure exceeding 4.4 lb / 2.0 kg. Doing so may
cause the scanner to malfunction or the Platen
Glass to break.
4
D
C
Close the Document Cover (A), press the COPY
button (D), then press the Black button (E) or
the Color button (F).
Copying will start.
Remove the document after printing.
•
Do not open the Document Cover (A) until copying is
complete.
E
A
F