Canon PIXMA MX340 Series Panduan Pengaturan Jaringan - Halaman 11

Jelajahi secara online atau unduh pdf Panduan Pengaturan Jaringan untuk Semua dalam Satu Printer Canon PIXMA MX340 Series. Canon PIXMA MX340 Series 26 halaman. Cartridge reset
Juga untuk Canon PIXMA MX340 Series: Panduan Instalasi (17 halaman), Instal Manual (11 halaman), Brosur (2 halaman), Manual (8 halaman), Manual (10 halaman), Pemecahan Masalah Pengaturan Jaringan (13 halaman), Panduan Instalasi Jaringan (16 halaman), Manual Koneksi (11 halaman), Panduan Servis yang Disederhanakan (35 halaman), Manual (4 halaman)

6-B

WPA/WPA2

Enter the network key in Passphrase (L).

•

Enter upper and lower case letters of the alphabet correctly when the network key is

between 8 and 63 characters. Letters are case sensitive.

Letters are not case sensitive if the network key is 64 characters.

Select Dynamic Encryption Type (M), then click OK (N).

•

When WEP (Transitional Security Network) is selected in AirPort Utility, select

AES(Secure Encryption).

Go to

The Manual Setup screen returns. Click Connect.

•

After that, follow the on-screen instructions to proceed with settings.

Disable

Restoring the Machine's Default LAN Settings to Perform Setup Again

Action

Follow the procedure below to restore LAN settings of the machine to the default state.

Use the Menu button to select Device settings.

Use the [ or ] button to select LAN settings, then

press the OK button.

Select Reset LAN settings, then press the OK button.

Select Yes, then press the OK button.

Make sure that the screen shown to the right appears.

•

After a while, the Device settings screen returns. Press the

COPY button.

The LAN setting of the machine is now restored to the default state.

•

Perform setup by following the procedures in "10 Set Up a Wireless Connection" on page 34 and

onward in the printed manual: Getting Started.

Wireless LAN

Inactive

SSID

BJNPSETUP

Data encryption

Inactive

TCP/IP setting

Obtain an IP address automatically