Canon PIXMA MX712 Setup Manual - Halaman 22
Jelajahi secara online atau unduh pdf Setup Manual untuk Semua dalam Satu Printer Canon PIXMA MX712. Canon PIXMA MX712 23 halaman. Guide for printer setup for network [spanish version]
Juga untuk Canon PIXMA MX712: Panduan Memulai (4 halaman), Pengaturan Faks (2 halaman), Spesifikasi (2 halaman), Manual Koneksi (6 halaman), Panduan Konfigurasi (Bahasa Inggris) (23 halaman)
Halaman Cetak
The device may not be able to connect to the network in the following cases:
If the DHCP function of the access point is inactive, enable the DHCP function or specify the IP address (IPv4 only)
of the printer and confi gure wireless connection settings again. In addition, make sure that the selected WEP key
number and entered WEP key are correct.
For details on how to check or change the settings of the access point, refer to the manual supplied with the access
point or contact its manufacturer.
To specify the IP address of the printer, follow the procedure below.
1. Press the MENU button.
2. Select Setup, then press the OK button.
3. Select Device settings, then press the OK button.
4. Select LAN settings, then press the OK button.
5. Select Other setup, then press the OK button.
6. Select TCP/IP settings, then press the OK button.
7 Select IPv4, then press the OK button.
8. Select Yes, then press the OK button.
9. Select IP address, then press the OK button.
10. Select Manual setup, then press the OK button.
Follow the on-screen instructions to proceed with settings.
When the setup is complete, press the MENU button.
To perform Advanced setup again
1. Press the MENU button (A).
2. Use the
buttons (B) to select Wireless LAN setup, then press the OK button.