DoorKing 1601-295 Panduan Pemilik - Halaman 8

Jelajahi secara online atau unduh pdf Panduan Pemilik untuk Penghalang Otomatis DoorKing 1601-295. DoorKing 1601-295 8 halaman. Break-away octagon arm installation kit
Juga untuk DoorKing 1601-295: Panduan Instalasi (11 halaman)

Halaman Cetak
REVERSE EDGE / RED GREEN LED INSTALLATION
This kit is designed to install on a 14 ft aluminum octagon arm for a 1601 barrier gate operator or
a 1603 auto spikes operator. It CANNOT be used with a 1602 operator.
Note: DO NOT operate arm with a malfunctioning reverse edge.
Installation
2
Slide on Spacer
Tip: Liquid soap will help
spacer slide on easier.
3
Slide on Edge
Tip: Liquid soap will help
reverse edge slide on easier.
Reinstall End Cap
3
Push a screwdriver through the hole in cap to release
spring while pushing cap on. Keep pushing cap on
until a "CLICK" is heard which locks it in place.
1601-269-D-2-20
1
Remove End Cap
Push a screwdriver through hole
in bottom of end cap to release
spring while pulling cap off.
Note: Spacer
MUST be in
position.
8
DoorKing Part Numbers
8080-080
Reverse Edge
8080-096
Reverse Edge + Red/Green LED
Octagon Arm
Spacer
Reverse/LED Edge
Cover
Spacer
Reverse/LED Edge
120 S. Glasgow Avenue
Inglewood, California 90301
U.S.A.