Canon PIXMA MX7600 Petunjuk Penyiapan - Halaman 2
Jelajahi secara online atau unduh pdf Petunjuk Penyiapan untuk Semua dalam Satu Printer Canon PIXMA MX7600. Canon PIXMA MX7600 2 halaman. Office all-in-one printer
Juga untuk Canon PIXMA MX7600: Panduan Tambahan (6 halaman), Petunjuk Penyiapan (2 halaman), Panduan Pengaturan Jaringan (43 halaman), Brosur (2 halaman)
Halaman Cetak
2
Easy Setup Instructions for
USB Connection and Software Installation
Important
Before proceeding to USB connection and software installation, be sure to read your setup sheet for preparing the machine first and complete hardware setup and Print Head alignment.
Note
•
Since Mac
OS 9, Mac OS X Classic environments, or Mac OS X v.10.3.8 or earlier are
®
not supported, do not connect the machine to these.
•
The screens below refer to Mac OS X v.10.4.x installation. Screens may vary
depending on the operating system you are using.
•
Log on as an Administrator.
•
Quit all running applications before installation.
a
Connect one end of the USB cable to the computer and the
other to the machine.
Note
Make sure the machine is turned on.
USB
Turn on your Mac and insert the Setup CD-ROM.
b
Note
If the CD-ROM folder does not open automatically, double-click the CD-ROM icon
the desktop.
c
Double-click the Setup icon.
When the Authenticate screen appears, enter your
d
administrator name and password. Click OK.
If you do not know your administrator name or password, click
the on-screen instructions.
Part no. QT5-0073-V01 © 2008 Canon Inc. "Macintosh" and "Mac" are trademarks of Apple Inc., registered in the U.S. and other countries.
e
When the main menu appears, click Easy Install.
The MP Drivers, On-screen Manuals, and application software are installed
automatically.
Note
If you want to select particular items to install, click Custom Install and follow the on-
screen instructions to proceed with the installation.
f
When the list of applications to install appears, confirm the
contents, then click Install.
Note
Move the cursor over items to display explanations of each application.
on
g
Read the License Agreement carefully and click Yes. The
software installation screen may appear during the installation
process. Read the contents on the screen and follow the on-
screen instructions to install the software.
h
When the Setup Complete screen appears, click Next.
, then follow
•
USB connection software installation are explained here. For wired LAN connection, refer to the Network Setup Guide.
•
A USB cable is necessary to connect the machine with your computer.
i
When the User Registration screen appears, click Next.
Note
To register later, click Cancel and go to Step j. After software installation is complete,
double-click
on the desktop.
If your network is connected to the Internet, the registration screen will appear.
Follow the on-screen instructions to register your product. You will need your
product serial number, which is located on the inside of the machine.
j
When the Installation completed successfully screen
appears, click Restart.
After the computer restarts, remove the Setup CD-ROM.
When the computer restarts, the Canon IJ Network Tool will start up
automatically.
Note
Keep the CD-ROM in a safe place in case you need to reinstall the software.
When using Mac OS X v.10.3.9:
Restarting the computer while connected to the machine may cause the
machine not to be detected. To resolve this, either unplug the USB cable then
plug it back in again, or turn the machine off then back on again.
Note
XXX FAX (where "XXX" is your machine's name) is shown in the Printer Name list
(Product list in Mac OS X v.10.3.9), but you cannot add XXX FAX. You cannot send
faxes from your computer via the machine.
Office All-In-One
k
When the Canon IJ Network Tool screen appears, select USB
connection, then click OK.
Note
When using Mac OS X v.10.3.9, before using the Operation Panel on the
machine to save scanned originals to the computer, it is necessary to select MP
Navigator EX as the launch application on Image Capture under Applications.
For details, refer to "Scanning Images" in the User's Guide on-screen manual.
Software installation is now complete.
XXXXXXXX Printed in THAILAND