Astralpool QG50 Panduan Pemilik - Halaman 13
Jelajahi secara online atau unduh pdf Panduan Pemilik untuk Penyedot Debu Kolam Renang Astralpool QG50. Astralpool QG50 16 halaman. Robotic pool cleaner
Halaman Cetak
QG50 robotic cleaner
2.
Starting at one of the wheels, pull on the inside of the
track to separate the tire lip from the wheel. Remove
the track from the cleaner.
3.
To install a new track, place the inside rib of the track
into the groove in the first wheel. (See Figure 32).)
4.
Stretch the track around the second wheel
(see Figure 32). Push and position the rib of the track
so that the track is seated properly in the groove of the
wheel.
5.
Verify the rib of the track is positioned properly within
the groove of each of the wheels. If necessary, turn the
wheels gently to seat track.
Figure 32. Stretch Track Around Wheels
owner's Manual
Section 6. Maintenance
6.1
Using the Information LED
The information LED
a specific sequence to indicate one of three possible
cleaner malfunctions.
LED
Flashing
1 Flash
•
Unplug the floating cable from the
LED flashes
control unit and reconnect.
once with
•
If the problem persists, contact your
one second
local retailer to request a diagnostic
interval.
review or call AstralPool Technical
Support 1300 186 875.
2 Flashes
•
Turn cleaner wheels to ensure they
LED flashes
are not jammed.
twice with
•
Check brushes for debris.
one second
•
Start a new cleaning cycle.
interval
•
If the problem persists, contact your
local retailer to request a diagnostic
review or call AstralPool Technical
Support 1300 186 875.
3 Flashes
•
Clean the filter canister.
LED flashes
•
Check the pump axis for debris.
three times
•
Check propellor for debris.
with one
•
Start a new cleaning cycle.
second
•
If the problem persists, contact your
interval
local retailer to request a diagnostic
review or call AstralPool Technical
Support 1300 186 875.
on the control unit flashes in
Solution
13