Canon 9540A003 - Optura 400 Camcorder Buku Petunjuk - Halaman 37

Jelajahi secara online atau unduh pdf Buku Petunjuk untuk Camcorder Canon 9540A003 - Optura 400 Camcorder. Canon 9540A003 - Optura 400 Camcorder 45 halaman. Digital video software (windows) ver.13 instruction manual

Halaman Cetak

Connecting the Camcorder to a Computer

❍

menu and select [SYSTEM]. Select [

to [STANDARD] and close the menu.

❍ Make sure the camcorder is being powered using the power adapter

before connecting it to a computer.

❍ Be sure to install the Digital Video Software before you connect the

camcorder to the computer.

❍ Connect the USB cable directly to one of the computer's main USB

ports. The interface may not function correctly if the camcorder is

connected via a USB hub.

❍ The connection may not operate correctly if you are using other USB

devices, excluding USB mice or keyboards, at the same time. If this

occurs, disconnect the other devices from the computer and try

reconnecting the camcorder.

❍ Do not connect two or more camcorders to the same computer via the

USB interface. The connections may not operate correctly.

❍ Never allow the computer to go into standby (sleep) mode while

a camcorder is connected via the USB interface.

❍ Refer to your computer manual for the location of the computer's USB

ports.

❍ See your camcorder instruction manual for connecting instructions.

Insert a memory card containing images into the camcorder.

Connect the power adapter to the camcorder.

Turn the POWER switch to PLAY (VCR) and move the TAPE/

CARD switch to CARD.

Wait until the card access indicator stops flashing.

Attach the supplied USB cable to the computer's USB port

and the camcorder's USB Terminal.

USB Terminal

on the Camcorder

Make sure the camcorder is set to [STANDARD]. Open the

USB Cable

Camcorder End

CONNECT], check that it is set

Computer End

USB Port on

the Computer