Astrapool HALO LITE2 Panduan Instalasi - Halaman 5

Jelajahi secara online atau unduh pdf Panduan Instalasi untuk Pengontrol Astrapool HALO LITE2. Astrapool HALO LITE2 12 halaman. Bluetooth light controller

Halaman Cetak
HALO
®
LITE
2™
Installation Manual
Section 2. System Overview
2.1
Kit Contents
The HALO LITE
controller allows you to control your
2
pool lights via the Halo Lite App.
Before starting, check that you have the correct parts as
shown in Figure 1. If any parts are missing or incorrect,
please call your local distributor or technical support at
1300 186 875 for assistance.
Halo LITE kit contents
a. HALO LITE
controller
2
b. Power supply terminal plug (2)
c. Screws 8G 3/4 (2)
d. Masonry plug 8G 25mm (2)
Figure 1.
Kit Contents
a
b
d
c
Section 3. Installation
3.1

Mounting

The HALO LITE
power supply mounts using a
2
"keyhole" mounting system, as shown in Figure 2.
Figure 2.
Power Supply Keyhole Mounting (back)
1.
Identify a suitable installation location.
NOTE: The distance between the Halo LITE 2 controller
and the App should be less than 15 meters for a
reliable Bluetooth connection.
2.
Insert the two mounting screws into the wall 60mm
apart. Use the two plastic masonry plugs (provided) if
mounting into masonry.
3.
Hang the power supply on the two screws by the
keyhole mounts. Ensure that the power supply drops
down into place and locks in position.
3.2

Power Connections

To connect your lights to the power supply:
1.
Insert Halo light cable wires into the green terminal
plug, see Figure 3. Wires can go into either socket,
there is no polarity.
2.
Tighten screws on top to secure.
Figure 3.
Power Supply Connectors
3.
Insert each green connector into the bottom
of the HALO LITE
controller, in any available
2
position.
4.
Plug the HALO LITE
mains outlet to power on.
controller mains cable into a
2
5