AmerTac ZHL110B Panduan Pemilik - Halaman 3

Jelajahi secara online atau unduh pdf Panduan Pemilik untuk Kontrol Jarak Jauh AmerTac ZHL110B. AmerTac ZHL110B 20 halaman.

Code Search

If your TV does not respond after you have tried all the

codes for your brand, or if your brand is not listed, try

searching for your code by following the steps below.

1. Manually turn on the TV to be controlled.

2. Press and Hold the POWER and MUTE buttons at

the same time until the red indicator remains on.

3. Release the buttons.

4. Press the CHANNEL UP button repeatedly (up to 300

times) until the device to be controlled changes channel.

The red indicator blinks off with each button press. If

you accidentally overshoot the code required, press

the CHANNEL DOWN button to backtrack through

the library until the device changes channel. Pressing

CHANNEL UP changes direction to forward again.

5. Press and release MUTE to install the code.

Note: Code Search starts from the currently stored 4

digit number.

Sleep Function

The SLEEP button operates the Sleep function of your

device providing it supports the Sleep function. Alter-

natively, you can enable the remote to turn off your TV

after a period of 1 to 99 minutes as shown below. This

feature works even if your TV does not have its own

Sleep function.

1. Press and Hold the POWER and MUTE buttons at

the same time until the red indicator remains on.

2. Release the buttons.

3. Press and release the SLEEP button (Note any previ-

ously set Sleep timer is canceled at this point and the

remote returns to normal operation).

4. Press and release the numeric buttons (01-99) for the

time required. The red indicator blinks off to indicate

button press acceptance and remains off after the

second button press.

5. The TV Sleep Timer is now set. Leave the Remote

pointing towards the TV with an unobstructed path.

To cancel the Sleep Timer, press and release the

POWER button or repeat Steps 1 and 2 above.