Astria Polaris42ZEP Panduan Petunjuk Instalasi - Halaman 16

Jelajahi secara online atau unduh pdf Panduan Petunjuk Instalasi untuk Perapian Luar Ruangan Astria Polaris42ZEP. Astria Polaris42ZEP 16 halaman. Outdoor decorative gas fireplace

Halaman Cetak

Step 6. (Refer to Figure 19 on Page 15)

A. Remove the orifice from the manifold with

a 1/2" deep throat socket. See the following

table for orifice sizes for natural and propane

models. Figure 22 illustrates the orifice. Use

pipe joint compound or Teflon tape on all

pipe fittings before installing (ensure propane

resistant compounds are used in propane ap-

plications, do not use pipe joint compounds

on flare fittings).

B. Retrieve the burner and slide the venturi tube

over the orifice. Secure the burner in place with

the clip shown in Figure 19.

Step 7. Reassemble the remaining components

by reversing the procedures outlined in the

preceding steps.

IHP reserves the right to make changes at any time, without notice, in design, materials,

specifications, prices and also to discontinue colors, styles and products. Consult your local

distributor for fireplace code information.

P/N 506023-33 REV. A 05/2014

Pilot Stage

Terminal

Ground

(TP)

Gas Outlet

To Burner

Burner Stage

Regulator

Terminal

Mounting Screw

Figure 20

ELECTRONIC PILOT

Sensor

Igniter

PROPANE

NOTE: If the igniter is damaged, a re-

placement kit is available, order Catalog

Number 87L54.

Figure 21

NOTE: DIAGRAMS & ILLUSTRATIONS ARE NOT TO SCALE.

P506023-33

Pressure-Tap

Pilot Gas

(Inlet)

Outlet

Pressure-Tap

(Manifold)

Burner Orifice Sizes

Elevation 0-4500 feet ( 0-1372 meters)

Pilot

Hood

Model

drill size (inches)

Polaris36

Polaris42

Figure 22

NATURAL

1508 Elm Hill Pike, Suite 108 • Nashville, TN 37210

Supply

Gas

Inlet

Nat.Gas

Propane

drill size (inches)

#28 (.1405")

#47 (.0785")

#28 (.1405")

#47 (.0785")