Akw Arka Thermostatic Cool Touch TMV2 Panduan Petunjuk Instalasi - Halaman 3

Jelajahi secara online atau unduh pdf Panduan Petunjuk Instalasi untuk Produk Pipa Akw Arka Thermostatic Cool Touch TMV2. Akw Arka Thermostatic Cool Touch TMV2 12 halaman. Mixer shower

Halaman Cetak

Minimum Dynamic Pressure

Maximum Dynamic Pressure

Maximum Static Pressure

Dimensions for Fitting

Concealed & Exposed Water Entry

Inlet Connectors

Valve Type

Approvals

Maximum Pre-Set Temperature

Maximum Pressure Difference

(Between Hot & Cold Water Supply)

Maximum Flow (@ 3 Bar)

Do not choose a position where the shower could become frozen. Do not connect this mixer

shower to any form of tap or fitting not recommended by the manufacturer. Do not allow the

inlet pressure or flow rates to operate outside the guidelines laid out in 'site requirements'.

this product is precision-engineered and should give continued superior and safe performance,

provided that:

1. it's installed, commissioned, operated and maintained in accordance with the

recommendations given in this manual and must be conducted by designated, qualified and

competent personnel.

2. installation must comply with all local/national water supply authority regulations/by-laws

and building and plumbing regulations.

3. periodic attention is given, as necessary, to maintain the product in good functional order.

this product is designed to deliver water consistently at a safe temperature. in keeping

with every other mechanism, the mixer shower cannot be considered as being functionally

infallible therefore it cannot totally replace the vigilance of nursing/supervisory staff where

that is necessary.

provided it is installed, commissioned, operated and maintained within these

recommendations, the risk of failure is not eliminated but can be reduced to a minimum.

Order: 01905 823 299

orders.akw-ltd.co.uk

Specifications

0.5 Bar

5 Bar

10 Bar

150 mm

Back

3/4" - 1/2" BSp

thermostatic Bar Shower mixer with

independent flow & temperature Control

tmV2, WRaS

1 Bar

19.5 L/min

Technical Support: 01905 560 219