Cognisys SCOUT Panduan Pemilik - Halaman 11

Jelajahi secara online atau unduh pdf Panduan Pemilik untuk Aksesori Kamera Cognisys SCOUT. Cognisys SCOUT 20 halaman.
Juga untuk Cognisys SCOUT: Panduan Pemilik (18 halaman)

Halaman Cetak

Note: This process is very quick – less than a quarter of a second! If you see your Repeater LED

indicator ramping up and down slowly in intensity that means it can't find the Camera Box.

Double-check that you've turned the Camera Box on!

If you ever change the "Wireless Channel" of your Camera Box or you want to change the

Repeater to use a different Camera Box on another "Wireless Channel" you'll need to start the

pairing process over. To do this:

1. Start with the Repeater turned off.

2. Press and hold the power button until the red LED indicator goes out (about 5 seconds).

3. Release the power button.

4. Repeat the "Pairing" process above.

2.10

Turning on the Repeater

To turn on the Repeater simply press and release the power button. Upon power-up, the

Repeater will attempt to connect to the Camera Box. If the Camera Box is out of range or

turned off, the Repeater will flash (on/off) the red LED indicator a few times to let you know it

can't communicate. No worries though! It doesn't need to talk to the Camera Box at this point

– the indicator is just to help you know that maybe something isn't quite right with the camera

trap setup.

Note: You don't have to turn on the Scout equipment in any order – the indicator is just a

helpful reminder.

Once the Repeater is on the LED indicator will slowly dim down until it is out.